Results 1 to 3 of 3

Thread: Kulp K16A-B eth0 Issues

  1. #1
    Join Date
    Nov 2011
    Posts
    21
    Post Thanks / Like

    Default Kulp K16A-B eth0 Issues

    Hello, having a strange issue here and not sure what is going on. I added a K16 this year to my show. The show is ran by a Pi running FPP v4.5 and an e682 and a F16V3 and those all work just fine still. The problem is the Kulp is refusing to take the static IP address that I have set.

    I set it up for 192.168.2.300 with a gateway of 192.168.1.200 but the controller always snags a different IP for eth0.

    Attached is a layout of the show network and a screenshot from the Kulp and F16V3 network settings.

    Any clues?
    Attached Images Attached Images
    Last edited by davis80; 12-04-2021 at 08:28 AM.

  2. #2
    Join Date
    Dec 2020
    Posts
    40
    Post Thanks / Like

    Default Re: Kulp K16A-B eth0 Issues

    Not sure if itís a typo but .300 isnít a valid IP address ( 255 is the max )


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Nov 2011
    Posts
    21
    Post Thanks / Like

    Default Re: Kulp K16A-B eth0 Issues

    Well, that was a big time dummy move. Changed to .205 and that fixed it. Thanks a bunch swanny.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •