Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: precompiled ren24 pwm firmware

  1. #11
    Join Date
    Dec 2011
    Posts
    7,564
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    Here is MpLab_ide 8.85 which works great for pickit ->

    X

  2. #12
    Join Date
    May 2007
    Posts
    5,745
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    Unfortunately both the red and green sites seem to have lost their file libraries.
    Phil

  3. #13
    Join Date
    Dec 2011
    Posts
    7,564
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    Quote Originally Posted by P. Short View Post
    Unfortunately both the red and green sites seem to have lost their file libraries.
    Uwe ....this is not good

  4. #14
    Join Date
    May 2007
    Posts
    5,745
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    I'm not sure where to go forward from this. At one point in time I thought that the DIYC file library was a place to put the files, that they wouldn't disappear. Obviously that wasn't a correct assumption. So now I'm skeptical that there is any place to put the files where they won't disappear without a trace. I know that I have a bit of storage available in my earthlink, but who knows when they will change their t&c or get upset if there's too much traffic. And that would obviously disappear fairly quickly if I ever get hit by a bus.
    Phil

  5. #15
    Join Date
    May 2007
    Location
    Powder Springs, GA
    Posts
    1,164
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    I was able to download the mplab version you posted. I only have the version released with the device installation disk v7.60a. am installing the newer to see how far i can get.
    If you are not a supporting member please consider Becoming an Active Member

  6. #16
    Join Date
    May 2007
    Location
    Powder Springs, GA
    Posts
    1,164
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    as a follow up to this thread I was able to compile my hex file using the mpasmwin utility. Thanks for all the assistance. I'll see if my work was successful tomorrow AM.
    If you are not a supporting member please consider Becoming an Active Member

  7. #17
    Join Date
    Feb 2008
    Location
    Warminster, PA
    Posts
    1,803
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    Just an fyi, the older MPLab ide versions can all still be downloaded directly from microchip.
    Chris
    [URL="http://www.maloneylights.com"]http://www.maloneylights.com[/URL]
    [URL="http://halloween.maloneylights.com"]http://halloween.maloneylights.com[/URL]
    [URL="http://ctm.maloneylights.com"]http://ctm.maloneylights.com[/URL]

  8. #18
    Join Date
    May 2007
    Location
    Powder Springs, GA
    Posts
    1,164
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    Quote Originally Posted by ctmal View Post
    Just an fyi, the older MPLab ide versions can all still be downloaded directly from microchip.
    While this is true, for whatever reason the older version would not install completely on my windows laptop. Go figure.

    Sent from my SM-G986U using Tapatalk
    If you are not a supporting member please consider Becoming an Active Member

  9. #19
    Join Date
    May 2007
    Location
    Powder Springs, GA
    Posts
    1,164
    Post Thanks / Like

    Default Re: precompiled ren24 pwm firmware

    Success! Again, to all that have pointed me in the correct direction, many thanks. May the show go on....... once I'm able to get Thanksgiving behind me.
    If you are not a supporting member please consider Becoming an Active Member

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •