F/S E68X to DMX adapter

[critic2]

This was Brian’s (budude) design. We used these with our Sandevices E680. (That was awhile ago) By the way, I’m still using one on a 9’ pixel tree.
You can use these with the E681 or E682. It provides a true RS485 signal for DMX on one of the pixel output ports.
I have 3 kits with both the straight and 90 degree RJ45 jack. The picture shows my assembled one on the left side.
Get them before they are gone?
$10 each, shipped. Lower 48.

1E61B7A0-AD07-40DB-8A75-8793A5B5BECD.jpg

[iflights]

To use these on an E680 you would have to create a little jumper from a 4 pin molex to this adapter, right?

[critic2]

You just solder the extra header pins (after removing the plastic spacers) onto the board for the 681 and 682.

76FCDC39-13C7-4DA2-A2C6-A760626417AD.jpg

I suppose you could just solder the wires from the molex directly to the adapter

B1AB4567-F3CA-4065-9EF4-E95F27161465.jpeg