Results 1 to 3 of 3

Thread: Pixel Pi Cape and FPP Master/Slave

  1. #1
    Join Date
    Jan 2012
    Location
    Chambersburg, PA
    Posts
    939
    Post Thanks / Like

    Default Pixel Pi Cape and FPP Master/Slave

    When using a Pixel Pi Cape controller (typical) as a FPP Slave, can a USB>RS485 adapter still be used to connect to a Renard controller?
    2012 - 1st year 64 Channels - 7500 LED lights - 5 sequences
    2013 - 128 Channels - 10,000 LED lights - 7 sequences (2 New)
    2014 - 201 Channels - upgrading 8 Arches to dumb RGB - 8+ sequences (1+ New)
    2015 - 240 Channels + 8 Universes - sequences TBD
    2016 - No Display
    2017 - Back in the Game - 240 Renard Channels + 12 Universes
    2018 - 256 Renard and 9 Falcon Outputs of Pixels - 16 sequences shown over 2 nights
    2019 - 256 Renard and 9 Falcon Outputs of Pixels - 16 sequences shown over 2 nights
    2020 - Emergency Conversion to Falcon F48 with limited wireless

  2. #2
    Join Date
    Oct 2014
    Location
    Sauk City, WI USA
    Posts
    1,769
    Post Thanks / Like

    Default Re: Pixel Pi Cape and FPP Master/Slave

    I have not tried it but the answer should no problems.

  3. #3
    Join Date
    Jan 2016
    Location
    Cedar Falls, IA
    Posts
    129
    Post Thanks / Like

    Default Re: Pixel Pi Cape and FPP Master/Slave

    Yes, I actually use usb to serial, but the setting is on the same screen. It is on the other outputs tab as found in manual on page 120. You'll set the start channel and the channel count to send.

    https://falconchristmas.github.io/FPP_Manual(4.0).pdf

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •