Results 1 to 5 of 5

Thread: Kulp 16A-B Hole Template for Bud Box

  1. #1
    Join Date
    Dec 2008
    Location
    DeBary, FL
    Posts
    54
    Post Thanks / Like

    Default Kulp 16A-B Hole Template for Bud Box

    I bought a kit from WiredWatts for the Kulp16A-B. It came with a bunch of cable glands. However the Bud Box did not come pre-drilled.

    Out of curiosity, does anyone have a template for drilling the holes in the box for the pigtails, vent, etc.?
    Two things are infinite: the universe and human stupidity; and I'm not sure about the universe.

    -Albert Einstein

  2. #2
    Join Date
    Jan 2015
    Location
    Kansas City Missouri
    Posts
    2,747
    Post Thanks / Like

    Default Re: Kulp 16A-B Hole Template for Bud Box

    Quote Originally Posted by jwilliams31 View Post
    I bought a kit from WiredWatts for the Kulp16A-B. It came with a bunch of cable glands. However the Bud Box did not come pre-drilled.

    Out of curiosity, does anyone have a template for drilling the holes in the box for the pigtails, vent, etc.?
    You can make your own template including the bottom for mounting everything. I don't use cable glands. They take up a lot of room and aren't really needed because water doesn't travel upwards.

    Sent from my SM-T710 using Tapatalk
    Last edited by pmiller; 01-16-2021 at 05:05 PM.

  3. #3
    Join Date
    Jun 2007
    Location
    centereach ny
    Posts
    219
    Post Thanks / Like

    Default Re: Kulp 16A-B Hole Template for Bud Box

    Quote Originally Posted by pmiller View Post
    You can make your own template including the bottom for mounting everything. I don't use cable glands. They take up a lot of room and aren't really needed because water doesn't travel upwards.

    Sent from my SM-T710 using Tapatalk
    What are those caps on the pops distro board? 3D prints? Iím interested in those! Nice setup


    Sent from my iPhone using Tapatalk
    Danny Smith

    2008 display:

    -168 renard 24 channels

    -fm transmitter: ramsey 25B

    -light count: 15,000+


    [CENTER]The thing always happens that you really believe in; and the belief in a thing makes it happen.[/CENTER]

  4. #4
    Join Date
    Nov 2013
    Location
    Morganton,North Carolina
    Posts
    1,816
    Post Thanks / Like

    Default Re: Kulp 16A-B Hole Template for Bud Box

    Looks like 3d printed covers for the power connections?
    (1)Falcon PI Player (Running the show)
    (1)Falcon F16V3
    (1) Kulp K32A-B
    (1)Renard SS16
    (1)Renard SS24
    (1)EDM-LCD-CS-EP
    (20)P10 Panels



    WIKI
    Become A Supporting Member

    Falcon Christmas
    Renard Controllers


  5. #5
    Join Date
    Jan 2015
    Location
    Kansas City Missouri
    Posts
    2,747
    Post Thanks / Like

    Default Re: Kulp 16A-B Hole Template for Bud Box

    Quote Originally Posted by MrLights2000 View Post
    What are those caps on the pops distro board? 3D prints? Iím interested in those! Nice setup


    Sent from my iPhone using Tapatalk
    Those caps I 3d printed to protect from accidently shorting out anything. Also printed 682 mounts, temp sensor mounts and distro board mounts. The mount for the LED work light is also 3d printed as well as the case for the large volt meter.

    Sent from my SM-T710 using Tapatalk
    Last edited by pmiller; 01-17-2021 at 12:20 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •