Where to buy pixel ?

[Benc2]

I just bought 6000 pixels, power supplies, extensions and pigtails.


Sent from my iPhone using Tapatalk

Did you email your order? I just checked their website and all the strings are 5v


Sent from my iPhone using Tapatalk

[K-State Fan]

I see that there are a ton of places to buy bullet pixels, but only some of them sell LED strips. Normally I would avoid strips like the plague, but I want to build some arches for my yard. Is any vendor/brand of strips more rugged and less likely to break? Where would you recommend to buy them from?

I used the ones from Wired Watts this year without issues.

[Palussa]

Did you email your order? I just checked their website and all the strings are 5v


Sent from my iPhone using Tapatalk

If you email them they have 12v pixels. That’s what I got.


Sent from my iPhone using Tapatalk

[kiknads]

All Things Pixels – https://allthingspixels.com/
Crockett Fantasy of Lights (CFOL) – https://cfolights.com/
DIY LED Express – http://diyledexpress.com/
Mattos Designs – https://mattosdesigns.com/
Paul Zhang – http://www.aliexpress.com/store/221277
Ray Wu – https://www.aliexpress.com/store/701799
RGB Man – https://www.facebook.com/TheRGBMAN/
Scott LED – http://www.scottled.com/
Wally’s Lights – https://www.wallyslights.com/
Wired Watts – https://www.wiredwatts.com/
Wizard of Wire – https://www.wizardofwire.com/

I think you may have paul zhang's store link incorrect, it leads to a blank store

[superdave]

Paul moved his store, that's to his old link. I believe his newer one is : https://www.aliexpress.com/store/4478030

[virgil1]

FYI, been shopping around for Pixels. I sent a note to Ray Wu, but found that 'local'(RGB-Man) was cheaper. Shipping from Ray was $155. With the 12% off being offered with RGB-Man, is cheaper for the same gear by about $54. Not a huge difference, but wanted to share. Talking about 3 PSUs, 12 - 100 string pixels(12V), plus 5 C9(50 per string) 12V Pixels, pigtails and power injector Ts. Haven't pulled the trigger yet, still going over my design a bit.

[munu]

Can you give part numbers? I have about a similar order but instead of C9 I will probably get more pixels and/or strings. I want xConnect connectors for the lights and will buy a bunch more incl T-connectors for PI plus end caps.

[virgil1]

@munu, sent you a private message with details. Let me know if you don't get it.

[Palussa]

I didn’t get anything.


Sent from my iPhone using Tapatalk

[munu]

@virgil1 I did get your PM. Thank you!