Results 1 to 3 of 3

Thread: LOR controller into F48 controlled by Xlights

  1. #1
    Join Date
    Dec 2017
    Location
    Louisiana
    Posts
    4
    Post Thanks / Like

    Default LOR controller into F48 controlled by Xlights

    Greetings from Louisiana,

    I hoping someone can help me with my issue.

    Simple Version: I can't get an Xlights sequence to light my AC lights


    My setup:

    Using Xlights, FPP in standalone to F48. F48 has several outputs of pixel data, all working with ZERO issues.
    I have a 16 Channel LOR controller connected to serial 3 of the F48.

    I can run the test function at the F48/Falcon network interface, through the FPP interface, and in Xlights. When the test activates the channel assigned to the AC lights they come on just fine. BUT I can't get them be recognized in a sequence in any way. They also won't function in "output to lights" mode. Only in test within Xlights. What am I missing here?
    What do my model settings need to be?

    Screenshots attached.


    PS: Non-important, Side-question, can I control individual channels on the LOR contoller, or is it all or nothing?
    Attached Images Attached Images

  2. #2
    Join Date
    Oct 2014
    Location
    Sauk City, WI USA
    Posts
    1,588
    Post Thanks / Like

    Default Re: LOR controller into F48 controlled by Xlights

    Is 4990 the right start channel?

    You should be able to control each channel independently.

  3. #3
    Join Date
    Jan 2017
    Location
    Kimberly, WI
    Posts
    246
    Post Thanks / Like

    Default Re: LOR controller into F48 controlled by Xlights

    Are you LOR controllers set to unit Id 1,2,3 and so on? They need to be.


    Sent from my iPhone using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •