Results 1 to 4 of 4

Thread: espixelstick V3 programming help needed

  1. #1
    Join Date
    Dec 2013
    Posts
    179
    Post Thanks / Like

    Default espixelstick V3 programming help needed

    I've purchased some espixelstick V3's, but I haven't programmed them yet. I have V2s already and have used a USB-TTL to program them following these instructions: http://forkineye.com/wp-content/uplo...-and-Usage.pdf. However, for the V3's, it looks like there's a micro or mini USB connector instead? I'm not sure how to go about programming the V3s. Do I use this tool: https://github.com/forkineye/ESPSFlashTool ? Thank you!

  2. #2
    Join Date
    Dec 2011
    Posts
    6,540
    Post Thanks / Like

    Default Re: espixelstick V3 programming help needed

    Yes use the tool . The usb simplifies the connection .
    You may need to install a driver for the Wemos ch340 chip
    https://docs.wemos.cc/en/latest/ch340_driver.html

  3. #3
    Join Date
    Dec 2018
    Location
    NJ
    Posts
    8
    Post Thanks / Like

    Default Re: espixelstick V3 programming help needed

    Take a look at this video: https://youtu.be/FqGbrHAUyVQ

  4. #4
    Join Date
    Dec 2013
    Posts
    179
    Post Thanks / Like

    Default Re: espixelstick V3 programming help needed

    Perfect!! Exactly what I needed along with the Wemos link from angus40. And, it also helps if you have the right micro USB cable. Not all micro USB cables are created equally apparently. The third cable I tried worked. Thank you both for your help! Now I can get back to setting up lights and xLights programming....

    Quote Originally Posted by rmore View Post
    Take a look at this video: https://youtu.be/FqGbrHAUyVQ

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •