Results 1 to 3 of 3

Thread: How to flip the spiral direction

  1. #1
    Join Date
    Dec 2017
    Location
    Indiana
    Posts
    93
    Post Thanks / Like

    Default How to flip the spiral direction

    Ok so I replaced the lights of my spiral tree with bullets pixels and itís is working somewhat. However when I build the prop in XLights the spiral is going the other direction that what it actually is on my tree. Itís almost like I need to mirror the prop or something. Iíll post pictures so you can see what Iím talking about. All of the up/down effects work good but I have problems with some of the left-right or right/left effects because the numbering is off because of the direction of the spiral.

    5806681E-A5CA-46DD-9BC5-D7BD9FA67F10.jpg 68D04939-E211-45D9-8313-15DAEEF13346.jpg

    Thank you for the help

  2. #2
    Join Date
    Dec 2012
    Posts
    20
    Post Thanks / Like

    Default Re: How to flip the spiral direction

    Just Change the Spiral Wraps to a negative Number and it will wrap in the opposite direction

  3. #3
    Join Date
    Dec 2017
    Location
    Indiana
    Posts
    93
    Post Thanks / Like

    Default Re: How to flip the spiral direction

    Quote Originally Posted by VBryan View Post
    Just Change the Spiral Wraps to a negative Number and it will wrap in the opposite direction
    Thank you I played with this for about an hour changing all sorts of numbers but couldn’t figure it out. I tried so many settings it wasn’t looking like a spiral tree. I had no idea you could put negative values in as an option

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •