Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Looking to trade

  1. #1
    Join Date
    Nov 2018
    Location
    Houston, Texas
    Posts
    872
    Post Thanks / Like

    Default Looking to trade

    Canceled thanks to angus and grumpy for the support .also may have found another controller.

    BRAND NEW
    NanoStation loco m2
    Edge Router-X
    Too complicated for me

    Would like to trade for a good e682 or equivalent. Send message if interested



    Sent from my iPhone using Tapatalk
    Last edited by wilmar; 01-29-2020 at 01:52 AM.

  2. #2
    Join Date
    Sep 2013
    Location
    Norwalk, Iowa
    Posts
    235
    Post Thanks / Like

    Default Re: Looking to trade

    Quote Originally Posted by wilmar View Post
    BRAND NEW
    NanoStation loco m2
    Edge Router-X
    Too complicated for me

    Would like to trade for a good e682 or equivalent. Send message if interested



    Sent from my iPhone using Tapatalk
    Is that a poe capable switch?

    Sent from my SM-G930P using Tapatalk

  3. #3
    Join Date
    Nov 2018
    Location
    Houston, Texas
    Posts
    872
    Post Thanks / Like

    Default Re: Looking to trade

    Yes has Poe on both items


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Sep 2013
    Location
    Norwalk, Iowa
    Posts
    235
    Post Thanks / Like

    Default Re: Looking to trade

    Quote Originally Posted by wilmar View Post
    Yes has Poe on both items


    Sent from my iPhone using Tapatalk
    Anything else youd be looking for?

    Sent from my SM-G930P using Tapatalk

  5. #5
    Join Date
    Nov 2018
    Location
    Houston, Texas
    Posts
    872
    Post Thanks / Like

    Default Re: Looking to trade

    Not sure really as everything Iíve tried so far I canít seem to get working except for the one e682 I have and one is not enough.


    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Dec 2011
    Posts
    6,253
    Post Thanks / Like

    Default Re: Looking to trade

    Start with your edge x router and follow the instructions to get it working first .
    Get a thorough understanding of how it works first then move to adding your m2 as a wifi ap .
    Small steps , you are not in a hurry !

    As Dirk said , setup the router as DHCP.

    Static IP Address
    1. Connect an Ethernet cable from the Ethernet port on
    your computer to the port labeled eth0/PoE In on the
    EdgeRouter. If you are using PoE, then connect your
    computer to the PoE switch or adapter.
    2. Configure the Ethernet adapter on your host system with a
    static IP address on the 192.168.1.x subnet.<<<<<<<<< this is what you configure your network adapter on your pc
    you can substitute the x with 2,3,4,........etc
    the subnet 255.255.255.0

    So something like this for your Pc ipv4
    Use the following address
    ip address 192.168.1.10
    subnet 255.255.255.0
    gateway 192.168.1.1



    3. Launch your web browser. Type https://192.168.1.1 in the
    address field, and press enter (PC) or return (Mac).
    4. The login screen will appear. Enter ubnt in the Username
    and Password fields. Read the Ubiquiti License Agreement,
    and check the box next to I agree to the terms of this License
    Agreement to accept it. Click Login.
    Last edited by angus40; 01-28-2020 at 12:37 AM.

  7. #7
    Join Date
    Oct 2016
    Posts
    80
    Post Thanks / Like

    Default Re: Looking to trade

    I think I have a 682 and know I haven't used it. I will check tomorrow if you really want to trade this for one.
    Edit: I have a 6804 not the 682. I'm trying to figure out how to delete this post to not clutter your thread but having no luck.
    Last edited by lugnut68f; 01-28-2020 at 12:21 AM.

  8. #8
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    2,113
    Post Thanks / Like

    Default Re: Looking to trade

    Wilmer, you have several months to learn how to setup these devices. You have them learn them. Just take notes as you go. and store them under the router.

    There are a lot of great network folks here that would love to help, but they are more focused in Super Bowl than this site. If you join the xLight online Wednesday afternoon online conferences, they can walk you thru it. Maybe someone can post the details to get online with them....I have it but not where I can access
    In Lights Therapy

  9. #9
    Join Date
    Dec 2011
    Posts
    6,253
    Post Thanks / Like

    Default Re: Looking to trade

    https://dl.ubnt.com/guides/edgemax/E...r_ER-X_QSG.pdf

    If you don't have the poe adapter , use eth1,eth2 or eth3 instead of eth0 to connect your pc .

    This cannot be that difficult to figure out .

    After you have used the method to login and setup your router , you will need to reset your Pc's network adapter to obtain ip address automatically

    BTW I am learning from your thread here also , don't give up !
    Last edited by angus40; 01-28-2020 at 01:24 AM.

  10. #10
    Join Date
    Nov 2018
    Location
    Houston, Texas
    Posts
    872
    Post Thanks / Like

    Default Re: Looking to trade

    Quote Originally Posted by lugnut68f View Post
    I think I have a 682 and know I haven't used it. I will check tomorrow if you really want to trade this for one.
    Edit: I have a 6804 not the 682. I'm trying to figure out how to delete this post to not clutter your thread but having no luck.
    No worries but if your interested in selling the 804 I may be interested in purchasing.


    Sent from my iPhone using Tapatalk

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •