Results 1 to 2 of 2

Thread: Swapped an e682 for an e6804, no longer outputting data

  1. #1
    Join Date
    Jun 2007
    Location
    Ontario, Canada
    Posts
    2,132
    Post Thanks / Like

    Default Swapped an e682 for an e6804, no longer outputting data

    I had an e682 running only 5 strings of pixels.
    1-1 42 pixels
    1-2 42 pixels

    2-1 40 pixels
    2-2 40 pixels

    3-1 38 pixels

    Those were the window frames on my old house, ran fine for years.

    New house, new windows, new controller.
    e6804
    plug 1 66 pixels
    plug 2 53 pixels
    plug 3 53 pixels
    plug 4. 114 pixes

    e6804 configured with the old e682 IP settings, and the same beginning Universe channel.

    works fine while on configuration page, tests and pixels correctly respond.

    tests cleared to 0 config saved, rebooted.


    new setup in vixen3 for window changes, mapped outings in preview, etc.


    Vixen 3 completely ignores the controller

    an tips?
    Cheers!
    Steve

    Learn 1 new thing everyday.

    "AURBO" -- Aurora Borealis

    My weather today



    Chat link | Christmas Wiki link

  2. #2
    Join Date
    Oct 2011
    Location
    Maryville, Illinois
    Posts
    1,712
    Post Thanks / Like

    Default Re: Swapped an e682 for an e6804, no longer outputting data

    Does the controller indicate it is receiving packets on the universes that are configured and they increment while Vixen is running with the controller enabled? If not, then somehow the data is not getting there or being recognized.

    Post screen shots of your config in Vixen and the controller.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •