Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Big issue

  1. #11
    Join Date
    Jan 2015
    Location
    Kansas City Missouri
    Posts
    2,309
    Post Thanks / Like

    Default Re: Big issue

    Jon. Here are the IP address of everything.
    Master - 192.168.1.238
    Remote - 192.168.1.239
    Controller 1 - 192.168.1.207
    Controller 2 - 192.168.1.208
    Controller 3 - 192.168.1.211
    Controller 4 - 192.168.1.212
    Controller 5 - 192.168.1.213
    Controller 6 - 192.168.1.216
    Computer 1 - 192.168.1.215
    Computer 2 - 192.168.1.202
    New cell phone - 192.168.1.142

    All the addresses have been the same for 3 years except the cell phone.

    The only other difference this year are the BBB. Previous years I used Pi's but due to panel flickering I switch to a BBB and decided to use a BBB for the master also. I may have to pull those and install the Pi's.

    I use Fling to track ip's and I don't see any 2 addresses being the same.

    Sent from my SM-T710 using Tapatalk
    Last edited by pmiller; 11-20-2019 at 02:48 AM.

  2. #12
    Join Date
    Jan 2015
    Location
    Kansas City Missouri
    Posts
    2,309
    Post Thanks / Like

    Default Re: Big issue

    Interesting. I used Fling to ping 192.168.1.215 while the computer was on and it said 100% packet loss. No ping returns.

    Sent from my SM-T710 using Tapatalk

  3. #13
    Join Date
    Jan 2015
    Location
    Kansas City Missouri
    Posts
    2,309
    Post Thanks / Like

    Default Re: Big issue

    Problem solved. Originally I had a 16 channel Renard attached to one of my 682's. The controller in Vixen was set to 16 but should have changed it to an 8 channel Renard. I notice it in the FPP setup. Somehow I missed that. Anyway, I'm ready for Thanksgiving launch. Thanks all for the input. It ended up being something simple and stupid.

    Sent from my SM-T710 using Tapatalk

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •