Results 1 to 4 of 4

Thread: How to Mount SS24 in CG2000 Enclosure

  1. #1
    Join Date
    Nov 2014
    Posts
    6
    Post Thanks / Like

    Default How to Mount SS24 in CG2000 Enclosure

    Hello!

    I'm working on building my second Renard SS24 kit... and just like the first one, I'm not sure how it should be mounted into the CG2000 enclosure included with the kit. Does anybody have a picture of their board mounted in the box? Or, if you created a custom mounting bracket, what material did you make that out of?

    Thanks!
    Jay

  2. #2
    Join Date
    Feb 2010
    Location
    Shawnee, KS
    Posts
    741
    Post Thanks / Like

    Default Re: How to Mount SS24 in CG2000 Enclosure

    I don't mount mine, I just let the wire tension hold the board in place



    I have 8 of these from over the years, and all are like that.
    Bruce
    Last edited by boyelroy11; 11-14-2019 at 03:19 PM.

  3. #3
    Join Date
    Nov 2014
    Posts
    6
    Post Thanks / Like

    Default Re: How to Mount SS24 in CG2000 Enclosure

    Quote Originally Posted by boyelroy11 View Post
    I don't mount mine, I just let the wire tension hold the board in place


    I have 8 of these from over the years, and all are like that.
    Bruce
    Thanks! So to confirm, you connect via the RJ45 and not the DB9?

  4. #4
    Join Date
    Feb 2010
    Location
    Shawnee, KS
    Posts
    741
    Post Thanks / Like

    Default Re: How to Mount SS24 in CG2000 Enclosure

    Quote Originally Posted by jaronervin View Post
    Thanks! So to confirm, you connect via the RJ45 and not the DB9?
    Correct. Even when I still used serial output ports, I made a custom cable to run from the serial port on the pc to the RJ45 input on the Renard boards:

    http://www.doityourselfchristmas.com...Connection.jpg

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •