Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: Starting my first set up with pixels.

  1. #21
    Join Date
    Jan 2017
    Posts
    408
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    Iím pretty sure Falcon still sells power distribution boards, along with their Falcon PiCaps

  2. #22
    Join Date
    Oct 2019
    Posts
    23
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.


  3. #23
    Join Date
    Jan 2017
    Posts
    408
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    Yup

  4. #24
    Join Date
    Oct 2019
    Posts
    23
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    Quote Originally Posted by Bwinter View Post
    Yup
    Since I'm using a PiCap and it's only 2 channels, does that mean if I want to sync to some music it would only be two strings with motion or can I break down each of the 2 channels into more sections? Each channel will be about 350 pixels apiece so I though of doing 6 sections on roof and then the 4 windows. I've looked and googled but couldn't find that much about the PiCap except hooking up 2 small strings and turning them on.

  5. #25
    Join Date
    Jan 2017
    Posts
    408
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    You can break down each output into multiple sections (I.e., window, front roof, top roof, etc), and sequence each section independently.

  6. #26
    Join Date
    Oct 2019
    Posts
    23
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    Awesome thanks!
    Another question. The distribution board is where I will run all my injection wires to correct?

  7. #27
    Join Date
    Jan 2017
    Posts
    408
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    Correct.

    Now would be a good time for you to draw up your wiring-schematic (not just lines on a picture of a house). It makes it easier for you to plan, and easier for the rest of us to reference if you have more questions.

  8. #28
    Join Date
    Oct 2019
    Posts
    23
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    https://www.amazon.com/Grand-General...J0P134AEGXD297

    Would this work good for my extensions between light sets? I would connect the connectors to them.

  9. #29
    Join Date
    Jan 2017
    Posts
    408
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    What connectors are you using?

  10. #30
    Join Date
    Oct 2019
    Posts
    23
    Post Thanks / Like

    Default Re: Starting my first set up with pixels.

    I have a few of the 13.5mm already but I can order different ones if I need to.

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •