Results 1 to 2 of 2

Thread: Help Ron's 4 output controller w/ Vixen

  1. #1
    Join Date
    Mar 2017
    Clinton Twp. Michigan
    Post Thanks / Like

    Default Help Ron's 4 output controller w/ Vixen

    Well I purchased and built my first 4 output controller. I am still new to controllers. I am lost at how to setup the controlled with Vixen 3. I can't seem to get it to work. I am using E1.31 from my computer to RX, I set vixen to multicast with universe 9. I have no ideal where the jumpers on the controller should be or the setting in vixen should be. I looked all over the net to see if I could learn how to set it up. Can't find anything. Update I was playing with the outputs and can now get the #1 output to work but not the other three.

    Last edited by AJVenti; 09-13-2019 at 12:52 PM.

  2. #2
    Join Date
    Oct 2014
    Sauk City, WI USA
    Post Thanks / Like

    Default Re: Help Ron's 4 output controller w/ Vixen

    On page 5 of the manual he shows the jumpers and start addresses. each output is 4 universes. Not sure how or if possible to set first universe as 9, but if you have all jumpers then start universe would be 16. each output is 4 so output 2 starts at universe 20, etc

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts