Results 1 to 3 of 3

Thread: Enclosure?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2007
    Location
    Orlando
    Posts
    57
    Post Thanks / Like

    Default Enclosure?

    I saw this question was asked a few posts down, but that was 2 years ago. So I thought I would ask the question again. Anybody have any recommendations for outdoor projector enclosures?

    I would like to try projection mapping. I think I know what software to use (HeavyM was recommended, but I see Madmapper is popular too). I think I know what to get in a projector. I just can't find a good solution for weatherproofing the projector. I'm not very handy so I would struggle to build something. The places that sell them already built are like $500. Any other suggestions?

  2. #2
    Join Date
    Jan 2018
    Posts
    167
    Post Thanks / Like

    Default Re: Enclosure?

    An ammo box would be perfect for the size, but again, comes the waterproofing. best bet is to cut a hole in the side, then seal it up with some RV silicone and a piece of glass. The projection should show through the glass fairly well.

  3. #3
    Join Date
    Jan 2015
    Location
    Staten Island New York
    Posts
    277
    Post Thanks / Like

    Default Re: Enclosure?

    I’ve seen people use a cooler with holes for vents facing downwards and they cover the hole with plexiglass siliconed into place for the lens.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •