Results 1 to 2 of 2

Thread: Vixen Site ICON Changed by Embedded Link

  1. #1
    Join Date
    Dec 2014
    Location
    Southern California
    Posts
    800
    Post Thanks / Like

    Angry Vixen Site ICON Changed by Embedded Link

    This morning I was looking at a new thread in the Arduino forum asking about a sketch to use with an SSR board. I clicked on the link to the SSR board. Then I noticed that my ICON for the DoItYourselfChristmas site changed to the ICON of the SSR site. I can't seem to reverse this change. I deleted the link to DoItYourselfChristmas and then re-booked it but the new ICON remains.

    The link is in the thread listed below.

    http://doityourselfchristmas.com/for...r-relay-board)


    Any suggestions on returning the original ICON?
    Kevin

    2017 - Pi3 w/FPP controlling 8 ESPixelsticks driving 1250pixels and 3 Arduino MEGAS communicating with ESP-01s driving 96 channels
    2016 - 184 channels of Blinking/Flashing using 4 Arduino MEGAs and cheap home-made props.

  2. #2
    Join Date
    Dec 2014
    Location
    Southern California
    Posts
    800
    Post Thanks / Like

    Default Re: Vixen Site ICON Changed by Embedded Link

    Finally figured out how to remove the pirate icon and get the normal icon back. Cleared the browser cache and then logged back in.
    Kevin

    2017 - Pi3 w/FPP controlling 8 ESPixelsticks driving 1250pixels and 3 Arduino MEGAS communicating with ESP-01s driving 96 channels
    2016 - 184 channels of Blinking/Flashing using 4 Arduino MEGAs and cheap home-made props.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •