Results 1 to 2 of 2

Thread: Sub parts for SSRneon-G2LED

  1. #1
    Join Date
    Jan 2008
    Location
    Clarksville, TN
    Posts
    282
    Post Thanks / Like

    Default Sub parts for SSRneon-G2LED

    Going through some old boxes I came across some SSRneon-G2-LED boards I never assembled.

    The LED listed in the BOM is obsolete, has a operating voltage of 2.5 V max (2 V typ) . I am looking to use an LED with a 1.9-2.1V forward voltage range. I just wanted to verify that I do not need to change the 220 ohm (R1-4) or the 680 ohm (R9). According to my math, I don't believe I do, but wanted to check with the experts.

    Thank you,

    Tony
    Tony
    Live since 2007
    Back after a break.
    Putting the Yule back into Yuletide.

  2. #2
    Join Date
    Dec 2014
    Location
    Springville, Utah
    Posts
    528
    Post Thanks / Like

    Default Re: Sub parts for SSRneon-G2LED

    You should be OK. With the 2.5v LED and 680 ohm, it's drawing about 3.7ma. With the newer LED you'd pull around 4.5ma, still well within most LEDs current capacity.

    Jimboha
    Springville, Utah

  3. Thanks ChiefWarrant thanked for this post

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •