Page 5 of 5 FirstFirst ... 345
Results 41 to 45 of 45

Thread: F16V3 to Renard

  1. #41
    Join Date
    Dec 2010
    Location
    Madison, Mississippi
    Posts
    883
    Post Thanks / Like

    Default Re: F16V3 to Renard

    Quote Originally Posted by harpster View Post
    Yes, you can also see that on the screenshot in my previous post link. Here it is again. I only run Renards at the standard FW 57.6K.

    Attachment 41169
    That's probably where the problem is.. anything over 56k and it has delays in controller.
    2017 - Hmmmm...lots has changed...
    Facebook: [URL="https://www.facebook.com/Stevensfamilylightshow/"]Stevensfamilylightshow[/URL]
    Youtube: [URL="http://www.youtube.com/channel/UCodTAksQo4tgLAyabUe1-dg"]Stevens Family Light Show[/URL]
    Web: [URL="http://www.stevenslightshow.com"]http://www.stevenslightshow.com[/URL] (under construction)
    [img]http://sig.falconchristmas.com/18222[/img]

  2. #42
    Join Date
    Jan 2010
    Posts
    429
    Post Thanks / Like

    Default Re: F16V3 to Renard

    Quote Originally Posted by duramadmax View Post
    That's probably where the problem is.. anything over 56k and it has delays in controller.
    So, in order to use Renard off a Falcon I need to change the baud from 57600 (shipped with) to a lower rate?

  3. #43
    Join Date
    Dec 2010
    Location
    Madison, Mississippi
    Posts
    883
    Post Thanks / Like

    Default Re: F16V3 to Renard

    Quote Originally Posted by gassy View Post
    So, in order to use Renard off a Falcon I need to change the baud from 57600 (shipped with) to a lower rate?
    I run 115k since I have a DIYled bridge, everyone else runs 56k and it supposedly works...
    2017 - Hmmmm...lots has changed...
    Facebook: [URL="https://www.facebook.com/Stevensfamilylightshow/"]Stevensfamilylightshow[/URL]
    Youtube: [URL="http://www.youtube.com/channel/UCodTAksQo4tgLAyabUe1-dg"]Stevens Family Light Show[/URL]
    Web: [URL="http://www.stevenslightshow.com"]http://www.stevenslightshow.com[/URL] (under construction)
    [img]http://sig.falconchristmas.com/18222[/img]

  4. #44
    Join Date
    Dec 2009
    Posts
    99
    Post Thanks / Like

    Default Re: F16V3 to Renard

    The standard Renard SS firmware is for 57,600 baud so aI think thatís what most people are using for Renard SS anyway.

    I agree that the DYILEDExpress Bridge works great but shouldnít be needed if the Falcon Controller passed the serial data correctly. Iím really glad I had the bridge available to use!

  5. #45
    Join Date
    Dec 2010
    Location
    Madison, Mississippi
    Posts
    883
    Post Thanks / Like

    Default Re: F16V3 to Renard

    Quote Originally Posted by harpster View Post
    The standard Renard SS firmware is for 57,600 baud so aI think that’s what most people are using for Renard SS anyway.
    Agreed and I only used 115k because I had high channel counts back in the day using leds. Now I could back it down 56k...

    Quote Originally Posted by harpster View Post
    I agree that the DYILEDExpress Bridge works great but shouldn’t be needed if the Falcon Controller passed the serial data correctly. I’m really glad I had the bridge available to use!
    Me to....
    2017 - Hmmmm...lots has changed...
    Facebook: [URL="https://www.facebook.com/Stevensfamilylightshow/"]Stevensfamilylightshow[/URL]
    Youtube: [URL="http://www.youtube.com/channel/UCodTAksQo4tgLAyabUe1-dg"]Stevens Family Light Show[/URL]
    Web: [URL="http://www.stevenslightshow.com"]http://www.stevenslightshow.com[/URL] (under construction)
    [img]http://sig.falconchristmas.com/18222[/img]

Page 5 of 5 FirstFirst ... 345

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •