Page 4 of 4 FirstFirst ... 234
Results 31 to 39 of 39

Thread: P10 Tune To Sign (2X2)

  1. #31
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    1,767
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by jchuchla View Post
    What made it hard? Setting up a matrix should be a really simple operation.


    Sent from my iPhone using Tapatalk
    Building the Border Element, A full letter box element, Top & Bottom Letter Box element, a First Second and third Letter box element. And that was just the 1X1 - needed to do same on 2X2 and 3X4
    In Lights Therapy

  2. #32
    Join Date
    Dec 2013
    Location
    Winter Haven Florida
    Posts
    2,955
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by mrGrumpy View Post
    Building the Border Element, A full letter box element, Top & Bottom Letter Box element, a First Second and third Letter box element. And that was just the 1X1 - needed to do same on 2X2 and 3X4
    you did a border for each letter?
    James WinterHaven Fl

  3. #33
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    7,568
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    What exactly are you trying to accomplish that you're creating special groups out of your matrix pixels?

  4. #34
    Join Date
    Jan 2016
    Location
    Lizella, GA
    Posts
    1,262
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by jchuchla View Post
    What exactly are you trying to accomplish that you're creating special groups out of your matrix pixels?
    I don't know about the others, but I have not been able to figure out how to put a marquee like chase effect around the border of my 2x2 P10s
    Matt

  5. #35
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    7,568
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Try layering a white border effect as an intensity overlay layer over a pinwheel effect in the base layer.


    Sent from my iPhone using Tapatalk

  6. #36
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    1,767
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by TazChaLet View Post
    you did a border for each letter?
    Maybe I should have said TEXT Box.
    On 2X2 I have a 3 pixel border and another 4 pixel border

    On the 3 pixel border (P5):
    Rows 1-3 and rows 62-63 - all columns
    Row 4 thru 61, columns 1-3 (for left)
    Row 4 thru 61, columns 126-128 (for right)

    Text Box (note one pixe space between border and textbox)
    Top Row 34 - 59
    Bottom Row 5 - 30
    In Lights Therapy

  7. #37
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    1,767
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by jchuchla View Post
    Try layering a white border effect as an intensity overlay layer over a pinwheel effect in the base layer.


    Sent from my iPhone using Tapatalk
    Works, but not very good looking
    In Lights Therapy

  8. #38
    Join Date
    Jan 2016
    Location
    Lizella, GA
    Posts
    1,262
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by mrGrumpy View Post
    Works, but not very good looking
    I agree, the Pinwheel is wider at the top left and lower right corners than anywhere else. I am just looking for a block of say 5 pixels (2 wide border) that chase around the border or even something like the alternating effect, you can use that tweak it to get close but them sides don't match right. And if you use Bars, the top and bottom look good but then the side are just alternating solid colors.

    The best way I have found is to set the text and anyother background effect (snowflakes) at the default layer, the add the Border effect as Mask and Fill layer, setting it to a solid color, then add your Bars, Alternating, Pinwheel, Plasma effect as a Chroma Key layer and configure it to key on the color you set the Border to.

    Capture.JPG
    Matt

  9. #39
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    1,767
    Post Thanks / Like

    Default Re: P10 Tune To Sign (2X2)

    Quote Originally Posted by Ruppro View Post
    I agree, the Pinwheel is wider at the top left and lower right corners than anywhere else. I am just looking for a block of say 5 pixels (2 wide border) that chase around the border or even something like the alternating effect, you can use that tweak it to get close but them sides don't match right. And if you use Bars, the top and bottom look good but then the side are just alternating solid colors.

    The best way I have found is to set the text and anyother background effect (snowflakes) at the default layer, the add the Border effect as Mask and Fill layer, setting it to a solid color, then add your Bars, Alternating, Pinwheel, Plasma effect as a Chroma Key layer and configure it to key on the color you set the Border to.

    Capture.JPG
    When using BARS on Elements, TOP and BOTTOM are Horizontal, and SIDES are Vertical
    Here is what I got on my 1X1 P5 - - the second is using 3D
    These are using elements for top, left, right and bottom frames (BORDERS)

    1X1.JPG1X13D.JPG


    Edit: Add Red/White Fancy Frame
    1X1Red.JPG
    Last edited by mrGrumpy; Today at 06:51 AM.
    In Lights Therapy

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •