Results 1 to 4 of 4

Thread: Ws2811 12v and 5v pcbs for ?

  1. #1
    Join Date
    Dec 2011
    Posts
    5,697
    Post Thanks / Like

    Default Ws2811 12v and 5v pcbs for ?

    I have purchased a few
    Last edited by angus40; 03-09-2019 at 07:22 PM.

  2. #2
    Join Date
    Dec 2011
    Location
    UK S80 postcode
    Posts
    1,384
    Post Thanks / Like

    Default Re: Ws2811 12v and 5v pcbs for ?

    Hi, I’m using them this year with an opto coupler and triac to switch (no dimming) 10W LEDs used as strobes. They can be added any to existing WS2811/12 string and saves running another data line and concerns with null pixels or amps.

  3. Likes angus40 liked this post
  4. #3
    Join Date
    Dec 2013
    Posts
    70
    Post Thanks / Like

    Default Re: Ws2811 12v and 5v pcbs for ?

    You can add in a rgb amp to power dumb strings with one chip. I am about to experiment with meteor lights. I want to be able to switch the meteor lights on and off so they will not flash at their own rate.

    Sent from my LG-H931 using Tapatalk
    Mostly C9 Light Show, powered by Arduino. 48A Full On last year. "It feels like a carnival"
    https://www.facebook.com/ItsaDillonChristmas/

  5. Likes angus40 liked this post
  6. #4
    Join Date
    Dec 2011
    Posts
    5,697
    Post Thanks / Like

    Default Re: Ws2811 12v and 5v pcbs for ?

    I have not had time
    Last edited by angus40; 03-09-2019 at 07:23 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •