Quote Originally Posted by StickyWicket View Post
I was racking my head on how to get the tightest spacing with pixels at the bottom while still allowing individual tension on each strand. It’s simple solution and only takes a bit to adjust them.

One thing you will get that’s not self evident is twisting in the more horizontal rays. It bugged me a ton at first but it’s almost impossible to notice at my typical viewing distance.
Did you try using zip ties to connect the bottoms of the rays to the U bolt"? That would have been my first thought. Looking at the close up picture it seems like the rope itself is introducing the twist as it makes its way around the bolt, when the loops on the bolt are close there is very little twisting, but near the horizontals, there is more space between the loops on the bolt.