Results 1 to 4 of 4

Thread: Chromacane 99 Odd Sequence

  1. #1
    Join Date
    Aug 2018
    Location
    Tucson, AZ
    Posts
    32
    Post Thanks / Like

    Default Chromacane 99 Odd Sequence

    I've setup a chromacane 48 successfully before. Now I'm trying to get a chromacane 99 setup. We verified it was wired correctly. I applied a vertical bar effect with white, red and blue. It looks like it's going through the string sequentially. Anyone have any ideas what would be going on?
    Here's the video: https://drive.google.com/file/d/1VQ4...w?usp=drivesdk

    Sent from my ONEPLUS A6003 using Tapatalk

  2. #2
    Join Date
    Jan 2016
    Location
    Buellton, California
    Posts
    289
    Post Thanks / Like

    Default Re: Chromacane 99 Odd Sequence

    If you used the model in Xlights wiring view is from the back of the cane. You can flip the model horizontally under model data depending if its facing left or right.

  3. #3
    Join Date
    Aug 2018
    Location
    Tucson, AZ
    Posts
    32
    Post Thanks / Like

    Default Re: Chromacane 99 Odd Sequence

    Quote Originally Posted by uncledan View Post
    If you used the model in Xlights wiring view is from the back of the cane. You can flip the model horizontally under model data depending if its facing left or right.
    Yup I flipped it to the correct orientation and made sure we looked at the back side while wiring.

    Sent from my ONEPLUS A6003 using Tapatalk

  4. #4
    Join Date
    Aug 2018
    Location
    Tucson, AZ
    Posts
    32
    Post Thanks / Like

    Default Re: Chromacane 99 Odd Sequence

    Probably a related question. We were debating which side is data in on his pixels. My pixels have the chip on the data out side. Is this always the case with ws2811 pixels?

    His pixels also differed from mine where my arrow points up, where his points down. Does the orientation of the arrow matter, or is it just an indication of the data in side?

    Sent from my ONEPLUS A6003 using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •