Results 1 to 4 of 4

Thread: Renard Plus ESPixel WiFi

  1. #1
    Join Date
    Nov 2018
    Location
    Concord NH
    Posts
    14
    Post Thanks / Like

    Default Renard Plus ESPixel WiFi

    I just bought the Renard pixel plus to run 4-8 arches with LED strips to try things out. This may be a dumb question but how many channels does that pixel plus have?


    Sent from my iPad using Tapatalk

  2. #2
    Join Date
    Feb 2009
    Location
    Plymouth, MN
    Posts
    9,053
    Post Thanks / Like

    Default Re: Renard Plus ESPixel WiFi

    It works just like the ESPixelStick. It's a Pixel controller for up to 4 universes (i.e. 2040 channels), and it uses Shelby's ESPixelStick pixel firmware in the ESP-01 module. It's for smart pixels. It's not designed for dumb strips or full strings of LEDs, etc.

    Here's the manual for it, if you don't have it already: http://renard-plus.com/files/Renard_...ixel_v1.0a.pdf
    Last edited by dirknerkle; 11-16-2018 at 05:50 PM.

    http://digwdf.com/store/
    The DIGWDF Store will be closing at the end of December -- but there's still a little stock left!
    While it's still open, please check us out for blinky-flashy gizmos that nobody else on the planet makes!

  3. #3
    Join Date
    Nov 2018
    Location
    Concord NH
    Posts
    14
    Post Thanks / Like

    Default Re: Renard Plus ESPixel WiFi

    I have 2 16.4 addressable strips that I want to break down to 8 4 ft arches


    Sent from my iPad using Tapatalk

  4. #4
    Join Date
    Nov 2018
    Location
    Concord NH
    Posts
    14
    Post Thanks / Like

    Default Re: Renard Plus ESPixel WiFi

    Getting ready to assemble and I notice it is asking to add heat sync compound or silicone thermal pad. Which is recommended and link to where to get it? Not sure the size of the pad


    Sent from my iPad using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •