Results 1 to 4 of 4

Thread: Ray wu light's

  1. #1
    Join Date
    Nov 2016
    Location
    Washington State
    Posts
    135
    Post Thanks / Like

    Default Ray wu light's

    OK I just recived my Icicle strands and I am a bit confised. I am always used to making my own ends so I have no ideia what way is in or out on the strand.
    Plus the plugs he sends I assume they go to the controller brown, blue and yellow/green stripe wires which is which?
    Can somebody confirm?

  2. #2
    Join Date
    Nov 2016
    Location
    Washington State
    Posts
    135
    Post Thanks / Like

    Default Re: Ray wu light's

    I have figured it out. I have a bad strand.
    I didn't chnage wiring and plugged a new set in and bam lights.
    green/yellow data, blue grnd and brown v.

  3. #3
    Join Date
    Dec 2009
    Location
    Pedleton Kentucky (near Louisville)
    Posts
    250
    Post Thanks / Like

    Default Re: Ray wu light's

    Ray has wiring diagrams on his site. If you go to the item (icicle lights) go to the bottom of the page it shows a diagram.
    He also shows how to do power injection tees.
    See all our videos at:

    http://www.hickoryhollow74.wix.com/hickory-hollow

    Vixen 3.2

    "Electrical Tape is my Friend"
    Renard SS24 (12)
    Renard SS16 (3)
    Renard SS8 (3)
    33,000 + lights

  4. Likes tecnageek liked this post
  5. #4
    Join Date
    Jan 2014
    Posts
    73
    Post Thanks / Like

    Default Re: Ray wu light's

    I believe this is the pinout for the floods, which I got from Ray Wu around the first of the year:

    HTB1MEe7ckfb_uJkSnhJq6zdDVXat.jpg

    Regards,

    Dennis the Menace

  6. Likes tecnageek liked this post

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •