after update problem

[longhenk]

hi to all

after the update to 3.5 problems started here.
meby some one can help

building a lichtshow with 3 arduinos 2 set for pixel that was working and one for relay outputs.
After soms problems with contacts with arduino made a pcb for solid constrution.
that was working nice .

after update the working of the relays is very wrong.
even when i put back versie 3,4 this stays the same .

the relays are switching random also when there is no comando to do so.

take the arduino and a relay bord to a diverent laptop and there is working on version 3.3


running vixen 3.5 update
arduino mega
and 6 relay bords
running W10 64 bits

script what is running is the script that DEE is using
only he using 48 channels and i use 53

anyone this problem also



thanks and greating from the Netherlands

henk

[longhenk]

hi
after a day of trying noting works anymore.
3.2 3.4 3.5 3 x install nothing works .
it looks that vixen is not get data from the arduino,not posible tot set a efect stays dark.
the 32 and 64 version same problem.
when vixen starts 3 leds on the arduino are on ,after setting the header the relays starts random to work

looks somting is wrong on the computer

hoop some one a idee what to try

ill be happy

thanks

[MikeKrebs]

Are you using USB serial? or a real serial port? or USB to 485?

Have you checked the baud rate both in Vixen and on your arduino?

Are you using "header" code in the sketch? Have you set the same in Vixen?

[longhenk]

thanks for your idee mike

after reloaded vixen en the script looks that it is working
have reconect usb servel times al that was correct
wat i think is that er somting whas bloked in the laptop.
because the problem stays with old en new versions of vixen .
only reboot whas not good the usb need to be disconected also .
when i use a header the relays start a random chase

but so far it is working after 30 x instal lol

thanks for your help

and goodluck with the hobby


henk