Quote Originally Posted by Ruppro View Post
Falcon Player Manual

But all you do is connect your USB to RS to the Pi and boot it up, it will be added as a serial output, then in the Channel Outputs, on the "Other" Tab you Add a Renard output type, set your Start Channel and Channel Count, choose the Port and set your Speed.
Make sure you are not using the cheap knockoff USB to serial adapters. They work well, but when you have more than one you need to do a lot of extra configuration to make sure the channel to usb port relationship stays the same after each reboot. The more expensive devices use a chip that has a proper unique ID that prevents this from happening.