Results 1 to 4 of 4

Thread: First controller buold

  1. #1
    Join Date
    Nov 2017
    Posts
    46
    Post Thanks / Like

    Default First controller buold

    This is the board in which I am building my first controller set up. I am planning on putting a second PSU above the first. Any other thoughts or tips?

    Sent from my SM-G950U using Tapatalk

  2. #2
    Join Date
    Oct 2014
    Location
    Sauk City, WI USA
    Posts
    913
    Post Thanks / Like

    Default Re: First controller buold

    I am planning on putting a second PSU above the first.
    Blocking the fan? Get as much space in between as possible (leaving room for the fan on the top one).
    What is the gauge of wire you are using to go to/from the distribution panels? Might check your anticipated usage and make sure the wire is thick enough.
    It doesn't look like you have distribution for the second PSU. Just using it direct to the pixels?

  3. #3
    Join Date
    Nov 2017
    Posts
    46
    Post Thanks / Like

    Default Re: First controller buold

    No, of course not blocking the second. There will be plenty of space between the two. And yes the second PSU is for power injection. The wire should be plenty thick enough, I can't remeber it right now but its solid wire used for wiring.

  4. #4
    Join Date
    Dec 2014
    Posts
    132
    Post Thanks / Like

    Default Re: First controller buold

    Output wires from PSupply look rather thin to me.
    Also i dont see a fuse on the AC input

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •