Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Cheap ESP-01 Modules that don't work for an ESPixelStick

  1. #21
    Join Date
    Sep 2012
    Posts
    66
    Post Thanks / Like

    Default Re: Cheap ESP-01 Modules that don't work for an ESPixelStick

    Argh, bought 30 on eBay that showed Berg Micro. Guess what showed up...


    Sent from my iPhone using Tapatalk

  2. #22
    Join Date
    Dec 2012
    Location
    Silsbee, Tx
    Posts
    1,051
    Post Thanks / Like

    Default Re: Cheap ESP-01 Modules that don't work for an ESPixelStick

    I'm using firmware version 3.0 with no problems with non- Puya chips. But is there another update that I should use for non-Puya chips.
    Is ESPixel-master.rar an update to version 3.0 or is it to use on boards with the Puya chip to make them work in our pixel props?
    Last edited by 11Bravo; 10-12-2018 at 05:14 PM.

  3. #23
    Join Date
    Feb 2009
    Location
    Plymouth, MN
    Posts
    8,992
    Post Thanks / Like

    Default Re: Cheap ESP-01 Modules that don't work for an ESPixelStick

    I've always had better success with v3,0-rc3 than the straight v3.0. Something changed from the "release candidate" version to the final 3.0 version.

    http://digwdf.com/store/
    The DIGWDF Store will be closing at the end of this year.
    While it's still open, please check us out for blinky-flashy gizmos that nobody else on the planet makes!

  4. #24
    Join Date
    Dec 2012
    Location
    Silsbee, Tx
    Posts
    1,051
    Post Thanks / Like

    Default Re: Cheap ESP-01 Modules that don't work for an ESPixelStick

    I think I started out with v3,0-rc3 last year, but downloaded V3.0 when I was having problems with the ISP's with the Puya chip. After I removed those ISP's I didn't have any other problems even while running ver. 3.0., so guess I'll stick with the Ver. 3.0. I finally got the show going without a shut down on Dec. 23rd last year because of the Puya chip.
    I still have them and have ordered the 4mb memory chip to try my luck at replacing them.

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •