Results 1 to 3 of 3

Thread: Renard ESP Firmware

  1. #1
    Join Date
    Dec 2012
    S.E Michigan
    Post Thanks / Like

    Question Renard ESP Firmware

    I have not given up on running my SS Renards wireless.

    I have a bunch of Bill Porter boards and one hacked board to run the ESPPixelStick firmware native in serial mode.

    Is GitHub the latest firmware to try?

    Does the firmware still load on 1MB ESP's?

    104 Renard SS Channels and Counting

  2. #2
    Join Date
    Feb 2009
    Plymouth, MN
    Post Thanks / Like

    Default Re: Renard ESP Firmware

    If memory serves me correctly, Bill Porter designed the Renard ESP board and the firmware to use it, and he used the ESP's TX pin as the data output from the ESP module. Shelby's firmware uses the GPIO2 pin instead. You'll have to either use Bill's version of the firmware or hack the board to use Shelby's version.
    The DIGWDF Store will be closing at the end of this year.
    While it's still open, please check us out for blinky-flashy gizmos that nobody else on the planet makes!

  3. Likes Ruppro liked this post
  4. #3
    Join Date
    Jan 2016
    Lizella, GA
    Post Thanks / Like

    Default Re: Renard ESP Firmware

    The latest Firmware by Shelby w/ his flash tool is here and it does use the GPIO2 pin so you would need to modify Bill's boards

    For Bill's latest Firmware, based on Shelby's v2.1 code w/ Flash tool, but using the TX pin, you can download it here


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts