Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29

Thread: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

  1. #21
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    7,467
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    It shouldn’t be. I thought I had that fixed.
    Have you installed recent drivers for it? You’d need the package from FTDI that includes the d2xx.dll driver. If I recall it should be something like version 16


    Sent from my iPhone using Tapatalk

  2. #22
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    2,349
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    You probably checked it, but just in case:

    * Is the light set to channel 1 (per the example) as the DMX first channel?
    * Also, is it in "master" mode?
    Live, Laugh, Love.

  3. #23
    Join Date
    Jan 2017
    Posts
    105
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Quote Originally Posted by jchuchla View Post
    It shouldn’t be. I thought I had that fixed.
    Have you installed recent drivers for it? You’d need the package from FTDI that includes the d2xx.dll driver. If I recall it should be something like version 16
    Yea i have the latest from here. I reinstalled restarted, unplugged and replugged in the USB then started Vixen and still getting that error in the log.

    You probably checked it, but just in case:

    * Is the light set to channel 1 (per the example) as the DMX first channel?
    * Also, is it in "master" mode?
    Yes the LED is set to 001 for DMX address. Not in master mode.

  4. #24
    Join Date
    Jan 2017
    Posts
    105
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Some images of it working fine in Flight + all 5 channels function correctly.

    Sent from my Pixel 2 using Tapatalk

  5. #25
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    7,467
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Have you tried the 32 bit vixen version yet?


    Sent from my iPhone using Tapatalk

  6. #26
    Join Date
    Jan 2017
    Posts
    105
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Yessir tried both versions
    Quote Originally Posted by jchuchla View Post
    Have you tried the 32 bit vixen version yet?


    Sent from my iPhone using Tapatalk
    Sent from my Pixel 2 using Tapatalk

  7. #27
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    2,349
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Are there more than the two modes (master, remote)? If not, shouldn't this actually be in "Master" mode?
    I believe it was stated that in "Master mode" it was to control itself. In "slave/remote" it was to take its commands from a Master.
    Live, Laugh, Love.

  8. #28
    Join Date
    Jan 2017
    Posts
    105
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Quote Originally Posted by algerdes View Post
    Are there more than the two modes (master, remote)? If not, shouldn't this actually be in "Master" mode?
    I believe it was stated that in "Master mode" it was to control itself. In "slave/remote" it was to take its commands from a Master.
    So there is a mode where you can manually set the light to be whatever config you want as MASTER. (on red for instance) and then set the other 2 to SLAVE. I haven't tested that, maybe today, I am gonna try to rewire the 4 piners, cause there seems to be corrosion on connectors.

    Right now its the fact that Vixen wont start the FTDI driver for the OPENDMX USB. Jon? Any ideas? Troubleshooting?

  9. #29
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    7,467
    Post Thanks / Like

    Default Re: Need Help with DMX LED Wall Washers and ENTTEC ONPEDMX USB

    Ruthless,
    Your PM box is full. Please clear out some space so I can reply.

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •