Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: DIY E1.31 Bridge Help

  1. #11
    Join Date
    Jun 2008
    Location
    Boise Idaho
    Posts
    11
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge Help

    Set your IP to 192.168.1.207. You may be running into Subnet issues. 255.255.255.0 is common but if it is something smaller you would not be able to talk to the E1.31
    2011 - Static display
    2012 - 192 channels of blinky flashy (8 Ren SS24), 1 song
    2013 - Got to improve on it
    2017 - Getting Serious

  2. Thanks AJVenti thanked for this post
  3. #12
    Join Date
    Feb 2010
    Location
    Shawnee, KS
    Posts
    725
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge Help

    Tony, if you're interested, you could send me the bridge and I will verify operation. I have several of these in use (as does mikeh65). If there are issues, we can sort it out.

    Bruce

  4. Thanks AJVenti thanked for this post
  5. #13
    Join Date
    Dec 2007
    Location
    Lombard, IL
    Posts
    614
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge Help

    Quote Originally Posted by boyelroy11 View Post
    Tony, if you're interested, you could send me the bridge and I will verify operation. I have several of these in use (as does mikeh65). If there are issues, we can sort it out.

    Bruce
    I agree, you can send it to me as well. I would be happy to help. But I also agree with boyelroy11. Review the Wiki, it took me a little while to get my head wrapped round setting up my first bridge and the networking setup. Getting it down will help if you have to reset, upload firmware, or change configurations.

  6. #14
    Join Date
    Mar 2017
    Location
    Clinton Twp. Michigan
    Posts
    49
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge Help

    First let me thank boyeroy11 and mikeh65 for offering to let me send my e1.31 bridge to them to look at that was very nice.


    How let me tell you how I got it working. I did reload the firmware and did not have any luck with that. Just for the heck of it I connected to laptop computer and it started working. So I connected it back to my tabletop computer. Not working again. Than I changed the browser (edge) I was using to (internet explorer) and it works. Have no ideal why. maybe because Edge always went to Https:// and IE went to http:// if that was it I feel


    Thanks to all
    Last edited by AJVenti; 07-28-2018 at 07:26 AM.

  7. #15
    Join Date
    Dec 2011
    Posts
    5,622
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge Help

    Quote Originally Posted by AJVenti View Post
    First let me thank boyeroy11 and mikeh65 for offering to let me send my e1.31 bridge to them to look at that was very nice.


    How let me tell you how I got it working. I did reload the firmware and did not have any luck with that. Just for the heck of it I connected to laptop computer and it started working. So I connected it back to my tabletop computer. Not working again. Than I changed the browser (edge) I was using to (internet explorer) and it works. Have no ideal why. maybe because Edge always went to Https<<<<<<<<<<<<<:// and IE went to http:// if that was it I feel


    Thanks to all
    That is exactly !

    If you check the Wiki documentation you will not see https , only http .
    This can be easily overlooked .
    Great to see you have it working .

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •