Results 1 to 4 of 4

Thread: Splicing Boscoyo Chroma Mesh

  1. #1
    Join Date
    May 2016
    Posts
    108
    Post Thanks / Like

    Default Splicing Boscoyo Chroma Mesh

    I'm needing to make a 5x6 foot matrix and plan to use Boscoyo ChromaMesh. Are there any problems or tricks I should know when it comes to joining pieces of the mesh together?? The plan is to cut one 4x8 piece into a 4x6 piece then cut a 1x6 piece from another net. Splicing will be with 4" cable ties. Thanks for the input.

  2. #2
    Join Date
    Jan 2016
    Location
    Lizella, GA
    Posts
    1,122
    Post Thanks / Like

    Default Re: Splicing Boscoyo Chroma Mesh

    I would overlap the joint by at least 1 if not 2 pixels.
    Matt

  3. #3
    Join Date
    Dec 2010
    Location
    Griswold, Connecticut
    Posts
    293
    Post Thanks / Like

    Default Re: Splicing Boscoyo Chroma Mesh

    Iíve repaired and spliced other boscoyo products by overlapping and supergluing and never had a problem.

  4. #4
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    2,210
    Post Thanks / Like

    Default Re: Splicing Boscoyo Chroma Mesh

    Quote Originally Posted by blantrip View Post
    I’ve repaired and spliced other boscoyo products by overlapping and supergluing and never had a problem.
    Super glue and periodic zip ties. (Paranoia sometimes runs in the family! )
    "Never Give Up. Never Surrender!"
    Capt Tagert - Galaxy Quest.
    Al Gerdes - Christmas Lighting Nut!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •