Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: DIY E1.31 Bridge and Pixel extender setup

  1. #31
    Join Date
    Sep 2009
    Location
    Omaha, Ne
    Posts
    3,131
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge and Pixel extender setup

    Yeah a hard reset. There is really nothing that will change as far as the timings go ect but I am wondering if maybe a configuration parameter is causing the offset values to be read wrong and its sending the wrong area of data to the pixels. Just guessing here since updating to the 400ms timing fixed others with the issue.

  2. #32
    Join Date
    Dec 2007
    Location
    Lombard, IL
    Posts
    598
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge and Pixel extender setup

    If it helps, I have been using your 12v ws2811 square pixels for most all of my other props. They are working fine.

  3. #33
    Join Date
    Sep 2009
    Location
    Omaha, Ne
    Posts
    3,131
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge and Pixel extender setup

    I received the test string and have identified the problem. The core timing of the bits was changed alittle bit to resolve the problem. I tested with this years and last years pixels that had the new reset timing and both work now. Please try this 4.04 (Not found! HAH) version and verify it works for you and I will post it in the Wiki.
    Attached Files Attached Files

  4. #34
    Join Date
    Dec 2007
    Location
    Lombard, IL
    Posts
    598
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge and Pixel extender setup

    SUCCESS!!! New eeprom works! Tested will all of my strings on the prop. Works great. Have not tried with older strings yet but problem with new one's has been resolved. Thanks Dave for the update/fix.

  5. #35
    Join Date
    Jan 2015
    Posts
    42
    Post Thanks / Like

    Default Re: DIY E1.31 Bridge and Pixel extender setup

    Version 4.04 fixed my problem as well. Thx

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •