Results 1 to 4 of 4

Thread: 24" Chormaflake

  1. #1
    Join Date
    Jan 2010
    Posts
    376
    Post Thanks / Like

    Default 24" Chormaflake

    Thinking about getting some of these 3 prong Chromaflakes and was wondering the best way to "route" the pixels. Would be using square pixels with 4" spacing. Will this pattern work or is there a better way?


    24Chromaflake.jpg

  2. #2
    Join Date
    Aug 2013
    Location
    Surprise, Az
    Posts
    483
    Post Thanks / Like

    Default Re: 24" Chormaflake

    Here is how I did mine...

    Snowflake Wiring.jpg

  3. Thanks gassy thanked for this post
  4. #3
    Join Date
    Mar 2012
    Location
    Lebanon, Illinois, USA
    Posts
    2,320
    Post Thanks / Like

    Default Re: 24" Chormaflake

    That would work.
    Did you hunt for an already defined wiring diagram?
    There may be one that has been done as a custom prop, with wiring already figured out.
    (Reinventing the wheel, and all of that.)
    Live, Laugh, Love.

  5. Thanks gassy thanked for this post
  6. #4
    Join Date
    Jan 2017
    Posts
    148
    Post Thanks / Like

    Default Re: 24" Chormaflake

    If you use xlights then you can import the chromaflake and look at how it’s wired in the custom model.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •