Results 1 to 1 of 1

Thread: Does SSREz require current sinking?

  1. #1
    Join Date
    Oct 2009
    Post Thanks / Like

    Default Does SSREz require current sinking?

    I had several SSREz relays connected to an Arduino Mega (5V). I had some serial I/O performance problems with the mega so I tried switching to the Arduino Due (3.3V). To my surprise the SSREz seemed to work just fine in initial testing, however during my show I noticed random flickering when everything was supposed to be off. I suspect the 3.3V output is fluctuating (dropping) causing the relay to turn on briefly.

    I believe I have the SSREz wired so that the Arduino is sinking current to turn them on. Could they be wired so that the Arduino is sourcing current instead?

    I was considering buying a level shifter to get the control signal back up to 5V. However I can't tell from the specs on this product if it supports current sinking as I am not a EE.
    Last edited by JCB; 02-03-2018 at 01:19 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts