Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 51

Thread: 27 Channel Controller + Vixen 3

  1. #41
    Join Date
    Dec 2012
    Location
    Hudson MA
    Posts
    3,178
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    Your color issue is most likely a patching issue. Dont go by wire color. Go by what the system does and adjust the patching.


    2018 - Moving and going to visit my Daughter in New Zealand. Most likely I will be dark or nearly dark, Some static stuff that is simple to put up.

  2. #42
    Join Date
    May 2017
    Location
    Portugal
    Posts
    57
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    i gave up with 27 Channel Controller + Vixen 3 and made my own.
    http://doityourselfchristmas.com/for...685#post489685

    Best regards zelev

  3. #43
    Join Date
    Dec 2013
    Location
    Winter Haven Florida
    Posts
    2,894
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    I have 2 27ch dmx board from holiday coro and both work fine with vixen
    James WinterHaven Fl

  4. #44
    Join Date
    May 2017
    Location
    Portugal
    Posts
    57
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    Maybe my cheap dongle is/was the issue!!!

    What kind of dongle do you have TazChaLet?

    it's from holiday coro?

    Best Regards
    Zelev

  5. #45
    Join Date
    Dec 2013
    Location
    Winter Haven Florida
    Posts
    2,894
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    Quote Originally Posted by zelev View Post
    Maybe my cheap dongle is/was the issue!!!

    What kind of dongle do you have TazChaLet?

    it's from holiday coro?

    Best Regards
    Zelev
    I have this board from HC http://www.holidaycoro.com/27-Channe...-Amps-p/25.htm and this dongle http://www.holidaycoro.com/Enttec-Pr...ongle-p/53.htm are you setting the dip switches correctly on your board
    James WinterHaven Fl

  6. #46
    Join Date
    May 2017
    Location
    Portugal
    Posts
    57
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    Maybe not....

    Ive set them up to receive data from vixen/pc and only with the first dip switch on.

    it's your board connected directly to your computer?
    Can you share your configuration?

    Best Regards
    Zelev

  7. #47
    Join Date
    Dec 2013
    Location
    Winter Haven Florida
    Posts
    2,894
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    my dongle is connected to the usb port and the controller connects to the dongle
    James WinterHaven Fl

  8. #48
    Join Date
    Dec 2013
    Location
    Winter Haven Florida
    Posts
    2,894
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    I see in your setup you have the baud rate set as 57600 dmx should be set at 230400 I think
    James WinterHaven Fl

  9. #49
    Join Date
    May 2017
    Location
    Portugal
    Posts
    57
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    Quote Originally Posted by TazChaLet View Post
    I see in your setup you have the baud rate set as 57600 dmx should be set at 230400 I think
    I will try that...

    Thanks
    Best Regards
    Zelev

  10. #50
    Join Date
    Dec 2013
    Location
    Winter Haven Florida
    Posts
    2,894
    Post Thanks / Like

    Default Re: 27 Channel Controller + Vixen 3

    I set mine in the setup of vixen and I also set the comm port in device manager for the port it is on
    James WinterHaven Fl

Page 5 of 6 FirstFirst ... 3456 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •