Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

  1. #1
    Join Date
    Jan 2009
    Location
    Columbus, Ohio
    Posts
    90
    Post Thanks / Like

    Default WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    I'm looking for the 3 wire conductor extensions that fit the factory installed pigtail on PixaBulbs.

    Good news is that I did receive by order from DIY LED (not) Express. However they incorrectly shipped me 2 wire conductors instead of the 3 wire that I ordered. I returned the 2 wire, paid for the shipping myself, to hopefully expedite replacement ones. Well it’s been over a month since I returned the 2 wire ones. Oh, I did get an email from Todd saying that the replacements conductors were being shipped and I should have them within a couple days. That was about a month ago. No response to my followup emails, asking for a tracking number or update on the shipment status.

    Does anyone know the supplier that DIYLED(not)Express used for the 2017 pre-sale? I’ll put in a new order if I can find out which extension fit the PixaBulb pigtails that were factory installed.

    Tks!
    Joe

  2. #2
    Join Date
    Jan 2009
    Location
    Columbus, Ohio
    Posts
    90
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    Bump. Really, nobody knows. The only alternative is to remove and replace the factory pigtail with another suppliers pigtail. Too much to do already, ugh!

    Tks!

  3. #3
    Join Date
    Nov 2011
    Location
    Chicago - Southwest Suburbs
    Posts
    6,642
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    I'm working on it. I have samples on their way from a few factories in China. Drawings look correct. Just need to verify with real samples. I'll post back with the results.
    They're being made somewhere. We just need to zero in on the right factory and design type.


    Sent from my iPhone using Tapatalk

  4. Thanks pixelpuppy thanked for this post
  5. #4
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    1,380
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    Following
    In Lights Therapy...

  6. #5
    Join Date
    Jan 2015
    Location
    Dallas TX
    Posts
    535
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    Following also.

  7. #6
    Join Date
    Jan 2009
    Location
    Columbus, Ohio
    Posts
    90
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    Any luck finding a compatible extension?

    Without a extension that matches the factory installed connector, my only option is to remove the factory installed one and replace it with another. Really don't want to do that. Way behind schedule now, and don't need anymore unnecessary work to do. Plus the replacement connectors that I purchased for a dozen mini-trees to be added in 2018.

    Hard to believe that whatever manufacturer, supplier DIYLED(not so)Express used, doesn't have any in stock or hasn't manufactured any for months now.
    Thanks!!!


    Quote Originally Posted by jchuchla View Post
    I'm working on it. I have samples on their way from a few factories in China. Drawings look correct. Just need to verify with real samples. I'll post back with the results.
    They're being made somewhere. We just need to zero in on the right factory and design type.


    Sent from my iPhone using Tapatalk

  8. #7
    Join Date
    Jan 2017
    Posts
    59
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    I have the same problem. Was shorted on pigtails from the group buy. Would like to have a source for these!

  9. #8
    Join Date
    Nov 2011
    Location
    Richmond, TX (Pecan Grove)
    Posts
    204
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    I would imagine the ones at holidaycoro would work: http://www.holidaycoro.com/Waterproo...ore-s/1938.htm

  10. #9
    Join Date
    Jan 2009
    Location
    Palmdale, CA
    Posts
    64
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    Quote Originally Posted by EMKLLK View Post
    I would imagine the ones at holidaycoro would work: http://www.holidaycoro.com/Waterproo...ore-s/1938.htm
    had to edit, looking more closely they won't, The pins in the connectors are the opposite type.
    Last edited by toy keeper; 10-05-2017 at 01:13 PM.

  11. #10
    Join Date
    Dec 2010
    Location
    Madison, Mississippi
    Posts
    858
    Post Thanks / Like

    Default Re: WTB – 3 wire conductor waterproof extensions - compatible with PixaBulbs

    You looking for the green 3 pin pigtails that came already installed on the pixabulbs or the green/white pigtails per the presale?

    I have cut all mine off and have the mate that came with the units...I use 4 conductors instead.
    2017 - Hmmmm...lots has changed...
    Facebook: Stevensfamilylightshow
    Youtube: Stevens Family Light Show
    Web: http://www.stevenslightshow.com (under construction)

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •