Page 6 of 6 FirstFirst ... 456
Results 51 to 53 of 53

Thread: Code help!!

  1. #51
    Join Date
    Nov 2009
    Location
    Morrisburg, On, Canada
    Posts
    2,356
    Post Thanks / Like

    Default Re: Code help!!

    Vixen 3 always sends a data stream. Therefore the Arduino is always reading Vixen data, unless you switch to random mode.
    When a sequence has ended Vixen sends a null data stream - i.e. all data =0x00.

  2. #52
    Join Date
    Dec 2014
    Location
    Southern California
    Posts
    380
    Post Thanks / Like

    Default Re: Code help!!

    In my experience it should turn all lights off when the sequence is stopped because, as LightUp said, Vixen continues to send all zeros which should be replacing the data in memory.
    When you hit stop, is it the STOP button in the menu item for the Execution Engine?
    Kevin

    2016 - 184 channels of Blinking/Flashing using 4 Arduino MEGAs and cheap home-made props.

  3. #53
    Join Date
    Jan 2014
    Posts
    35
    Post Thanks / Like

    Default Re: Code help!!

    Quote Originally Posted by kev View Post
    In my experience it should turn all lights off when the sequence is stopped because, as LightUp said, Vixen continues to send all zeros which should be replacing the data in memory.
    When you hit stop, is it the STOP button in the menu item for the Execution Engine?
    Hi Kevin,
    it seems to be fine now after a reboot of my PC...
    now to figure out this vixen programming thing

Page 6 of 6 FirstFirst ... 456

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •