Results 1 to 4 of 4

Thread: Esp32

  1. #1
    Join Date
    Jul 2013
    Posts
    113
    Post Thanks / Like

    Default Esp32

    Anybody using the ESP32 in their setup? I just got a few in and they work great at receiving E1.31. FastLED also supports it now if you want to drive pixels directly.

  2. #2
    Join Date
    Nov 2018
    Posts
    4
    Post Thanks / Like

    Default Re: Esp32

    Dear Sir, would you mind sharing the code for me try out E1.31 and to drive pixels.

  3. #3
    Join Date
    May 2016
    Posts
    234
    Post Thanks / Like

    Default Re: Esp32

    There are several different projects you can copy. The following is a e1.31 receiver using the esp8266: https://www.hackster.io/jasonspiva/e...troller-002072

    The ESP32 will run the same code provided that it is flashed to the Arduino IDE. Shelby Merrick (forkineye) and Bill Porter also have published their libraries and code that are used in the ESPixel line of controllers. Look for their stuff on github.

  4. #4
    Join Date
    Nov 2018
    Posts
    4
    Post Thanks / Like

    Default Re: Esp32

    Thank you Mr.Kensington, I am already using Jasonspiva's ESP8266 multiplexing Pixel controller and it works fine. But when I compile the same code for ESP32, it gives lot of compiling error as ESP32's library's are different, it seems. Please try it yourself and help me with a solution. Thanks in advance.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •