Page 10 of 11 FirstFirst ... 891011 LastLast
Results 91 to 100 of 106

Thread: Hopefully This Is Easier to Fix

  1. #91
    Join Date
    Jan 2012
    Location
    Tucson, AZ
    Posts
    668
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Quote Originally Posted by covewi View Post
    After nearly 3 months of work my 5 X 6 P10 panel matrix is up an running. Thanks to everyone for their help and ideas. I learned a lot and can't wait for the holidays.
    Thought I would post a few photos and ask another question.

    Which do you suggest? Lexan or Plexigalss (http://www.plasticgenius.com/2011/08...n-matchup.html)
    Also what thickness would work best for this size enclosure?

    Attachment 37641
    Attachment 37642
    Attachment 37643
    I use 1/4 inch lexan it stands up well to IF light and adds nice rigidity to the enclosure.


    Sent from my SM-G955U using Tapatalk

  2. #92
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    1,550
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Extruded Acrylic is the best and least pricy. Lexan is strong, but more prone to scratching and yellowing - does resist them rock throwers best. Acrylic does well with rocks, but nowhere like Lexan. Acrylic is much hard to scratch and no yellowing over time. I have 3 smaller P10, second season and all - all with acrylic.....Biggest P10 is 12 panels; I use 1/8", but 1/4 would be best for your size.
    In Lights Therapy

  3. #93
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Has anyone used or know about this product.

    http://www.homedepot.com/p/OPTIX-48-...102S/205351368

    Its expensive but its more online especially when I figure in shipping and cutting costs. Hopefully this will be an acceptable choice.

  4. #94
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    I couldn't see spending $200 + shipping for 1/4" X 65" X 39" for plexiglass to cover the matrix right now. I saw online where people are making storm windows and screen porch windows out of 16 mil clear vinyl. Its very strong, clear and tough.

    I am using these metal frame making strips - https://www.homedepot.com/p/Saint-Go...92-U/100397094 and https://www.growerssupply.com/farm/s...29_107760.html

    I did find that my local Joann fabric has the same stuff - http://www.joann.com/disco-vinyl-fab...r/1532449.html

    The corners will be connected using these - https://www.homedepot.com/p/Saint-Go...71-U/100397097

    The plan is to screw down the finished frame to the 1 X 1 that hold the P10 panels and then use silicone sealant to seal any gaps. This will also save adding 35 pounds to the overall weight of the matrix.

    I will post a photos by the weekend - I have to get this done in time for the next Thursdays opening night.

  5. #95
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Made the screen frame today - hopefully I get it covered in the next few days with the clear vinyl.

    IMG_4736.jpg
    IMG_4739.JPG
    IMG_4741.jpg

  6. #96
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    The clear vinyl frame was installed today and look like theres no interference. I feel that it will be a good alternative to plexiglass - at least for this first display season.
    Last edited by covewi; 11-20-2017 at 10:53 PM.

  7. #97
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    I finally got the protective vinyl secured. IMG_4758.jpg

  8. #98
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Some things never change - always a little problem. Does this happen to anyone else?

    The FPP runs perfectly from day to day but then every once in a while the show starts and just freezes at the first sequence. Reboot, restarts and power down doesn't help.
    So I take out the USB drive and reload all the sequences only and everything works again.

    Cover

  9. #99
    Join Date
    Jan 2011
    Location
    Los Banos
    Posts
    8
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Follow

  10. #100
    Join Date
    Oct 2009
    Posts
    630
    Post Thanks / Like

    Default Re: Hopefully This Is Easier to Fix

    Wow - its already been another year and thought I would get a head start on setting up the Pi P10 matrix.
    I updated FPP to the latest version v1.10-27-g259bc38 and have no issues with the software as long as the Pi is hardwired.

    Heres an image of the wifi setup and believe its okay.
    Once I disconnect the ethernet cable I cant connect to FPP.

    Covewi

    wifi.jpg

Page 10 of 11 FirstFirst ... 891011 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •