Page 5 of 5 FirstFirst ... 345
Results 41 to 44 of 44

Thread: Pickit 3 - Target Device Issue

  1. #41
    Join Date
    Dec 2012
    Location
    Hudson MA
    Posts
    3,808
    Post Thanks / Like

    Default Re: Pickit 3 - Target Device Issue

    As long as you see this:

    Target Device ID (0x0)

    Then you are not really talking to the PIC and you are back to looking at wiring



    2019 - Just moved into a new home (yet another change of plans). Will be dim but not dark. Too much to do at the new place to leave time for a show.
    https://www.youtube.com/channel/UCyX...ttrsZNARkUce0Q

  2. #42
    Join Date
    Dec 2011
    Location
    Gaithersburg, MD
    Posts
    219
    Post Thanks / Like

    Default Re: Pickit 3 - Target Device Issue

    Quote Originally Posted by MartinMueller2003 View Post
    As long as you see this:

    Target Device ID (0x0)

    Then you are not really talking to the PIC and you are back to looking at wiring

    WOW! OK, that explains a lot. So here is how I connect from the Pickit3 to the chip (see pix).

    From what I found:
    Pickit 3 PIC
    1 (w/ arrow) Blue - Pin 3
    2 Green ------------ Pin 1
    3 Yellow ------------ Pin 14
    4 Orange ----------- Pin 13
    5 Red --------------- Pin 12
    6 Brown - not used
    Attached Images Attached Images
    2016 Migrating to Vixen 3.2
    Vixen 2.5x
    120 Channels
    2015 5 RenardSS24 @ 20,600 lights
    2014 5 RenardSS24 @ 18,600 lights
    2013 3 RenardSS24 @ 9,900 lights
    2012 2 RenardSS24 @ 6,000 lights
    2011 began researching
    [url]www.KentlandsChristmas.com[/url]

  3. #43
    Join Date
    Jan 2013
    Location
    Northern Illinois
    Posts
    296
    Post Thanks / Like

    Default Re: Pickit 3 - Target Device Issue

    If you're trying to program a 16F688 I think you need to move the blue wire from pin 3 to pin 4 on the PIC.

  4. #44
    Join Date
    Dec 2011
    Location
    Gaithersburg, MD
    Posts
    219
    Post Thanks / Like

    Default Re: Pickit 3 - Target Device Issue

    Quote Originally Posted by dvc2013 View Post
    If you're trying to program a 16F688 I think you need to move the blue wire from pin 3 to pin 4 on the PIC.
    Got it! Green 1, Blue 4 all else the same. Unfortunately, same results.

    BTW - Thanks!
    2016 Migrating to Vixen 3.2
    Vixen 2.5x
    120 Channels
    2015 5 RenardSS24 @ 20,600 lights
    2014 5 RenardSS24 @ 18,600 lights
    2013 3 RenardSS24 @ 9,900 lights
    2012 2 RenardSS24 @ 6,000 lights
    2011 began researching
    [url]www.KentlandsChristmas.com[/url]

Page 5 of 5 FirstFirst ... 345

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •