Reply With QuoteFYI: MPASM can talk to the PicKit directly. You do not need to export or import.
Supporting Member
Re: Pickit 3 - Target Device Issue
Device family is PIC16, not 18 and I am pretty sure you should only have three empty rows in the back. FYI: Any 1.8v setting is not going to work for the programmer on the 688 parts. They can run that low but need a higher voltage to program.
2020 Full sized show reworked for the new location. Only adding (famous last words) 13 RBLs that I finally got converted to using pixels
2019 - Just moved into a new home (yet another change of plans). Will be dim but not dark. Too much to do at the new place to leave time for a show. Dim show (3000 pixels) had regular visits most nights.
https://www.youtube.com/channel/UCyX...ttrsZNARkUce0Q
Supporting Member
Re: Pickit 3 - Target Device Issue
FYI: MPASM can talk to the PicKit directly. You do not need to export or import.
2020 Full sized show reworked for the new location. Only adding (famous last words) 13 RBLs that I finally got converted to using pixels
2019 - Just moved into a new home (yet another change of plans). Will be dim but not dark. Too much to do at the new place to leave time for a show. Dim show (3000 pixels) had regular visits most nights.
https://www.youtube.com/channel/UCyX...ttrsZNARkUce0Q
Member
Re: Pickit 3 - Target Device Issue
Originally Posted by MartinMueller2003
I do not have an option for Device Family PIC16F.
2016 Migrating to Vixen 3.2
Vixen 2.5x
120 Channels
2015 5 RenardSS24 @ 20,600 lights
2014 5 RenardSS24 @ 18,600 lights
2013 3 RenardSS24 @ 9,900 lights
2012 2 RenardSS24 @ 6,000 lights
2011 began researching
[url]www.KentlandsChristmas.com[/url]
Supporting Member
Re: Pickit 3 - Target Device Issue
Click "All Families". That gets you the entire list. Scroll to the 16f688 device. Nothing will work properly if you do not get the device set properly.
2020 Full sized show reworked for the new location. Only adding (famous last words) 13 RBLs that I finally got converted to using pixels
2019 - Just moved into a new home (yet another change of plans). Will be dim but not dark. Too much to do at the new place to leave time for a show. Dim show (3000 pixels) had regular visits most nights.
https://www.youtube.com/channel/UCyX...ttrsZNARkUce0Q
Member
Re: Pickit 3 - Target Device Issue
Doesn't look like the PICkit3 can be used on your PIC16F688. Appears this requires the later "MPLAB ICD 3" programming device.
In Lights Therapy
Member
Re: Pickit 3 - Target Device Issue
OK. I now have installed MPLAB X IDE and I do see the All Families option and on the device list, I selected PIC16F688.
In the Power option, I have checked Power Target Circuit from Tool and it is set to 5v.
I attache the PIC adapter and click on read and I get the errors in the image.
Last edited by MikelMD; 04-27-2017 at 12:52 PM.
2016 Migrating to Vixen 3.2
Vixen 2.5x
120 Channels
2015 5 RenardSS24 @ 20,600 lights
2014 5 RenardSS24 @ 18,600 lights
2013 3 RenardSS24 @ 9,900 lights
2012 2 RenardSS24 @ 6,000 lights
2011 began researching
[url]www.KentlandsChristmas.com[/url]
Supporting Member
Re: Pickit 3 - Target Device Issue
I used picKit3 on 8.92 and higher versions of the IDE
2020 Full sized show reworked for the new location. Only adding (famous last words) 13 RBLs that I finally got converted to using pixels
2019 - Just moved into a new home (yet another change of plans). Will be dim but not dark. Too much to do at the new place to leave time for a show. Dim show (3000 pixels) had regular visits most nights.
https://www.youtube.com/channel/UCyX...ttrsZNARkUce0Q
Member
Re: Pickit 3 - Target Device Issue
The PIC16F688 is the standard PIC for the SS series controllers and many other Renard controllers. It can be programed w/ the PICkit2 (I have a clone - works fine) or the PICkit3
Matt
Member
Re: Pickit 3 - Target Device Issue
How would I use an external power supply and load the hex onto the chip? or, what is the Pickit 3 pinout to PIC16F688 connection to bypass the PIC board.
2016 Migrating to Vixen 3.2
Vixen 2.5x
120 Channels
2015 5 RenardSS24 @ 20,600 lights
2014 5 RenardSS24 @ 18,600 lights
2013 3 RenardSS24 @ 9,900 lights
2012 2 RenardSS24 @ 6,000 lights
2011 began researching
[url]www.KentlandsChristmas.com[/url]
Member
Re: Pickit 3 - Target Device Issue
I Use mpasm to program my chips actually think it was in the program (mplab x) I downloaded I found it the easiest to use
James WinterHaven Fl
Posting Permissions
Bookmarks