Results 1 to 10 of 44

Thread: Pickit 3 - Target Device Issue

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Join Date
    Jan 2015
    Location
    Folsom, CA, USA
    Posts
    2,256
    Post Thanks / Like

    Default Re: Pickit 3 - Target Device Issue

    Quote Originally Posted by MartinMueller2003 View Post
    hmm. To me it looked like three empty pins on the non-3m end and then the chip starting in the fourth pin on the non-3m end. The notch on the chip should be on the 3m end of the socket.
    Confirms my previous post.

    Quote Originally Posted by MartinMueller2003 View Post


    After that you need to set the jumpers for a 14 pin chip. Then you need a total of 7 jumpers.

    J1 position 2
    J2 and J3 and J4 and J5 and J6 and J7 all need jumpers between positions 2&3
    Jumpers could be interpreted both ways. Get the DIP14 placed properly, then try....if it doesn't work, try again with Martin view of jumpers.
    Last edited by mrGrumpy; 04-26-2017 at 01:09 PM.
    In Lights Therapy

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •