Page 1 of 4 123 ... LastLast
Results 1 to 10 of 37

Thread: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    3,670
    Post Thanks / Like

    Default RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    Group Buy for the low cost ESP8266 based Adapter for Renard Controllers

    What does it do?

    The RenardESP adapter will convert any Renard that uses the SS BOM (and most of the non - SS models) from a device controlled by RS-485 Serial to a device controlled by e1.31 or sACN over WiFi. It does this by replacing the RS-485 receiver chip on the Renard board.

    So instead of running CAT 5 through your yard and connecting your Renards to a RS-485 USB adapter or an e1.31 bridge, you can cut the cords and stream all your control data over wifi.


    Group Buy Rules: Read before posting in this thread!

    By participating in this Group Buy all participants agree to release www.doityourselfchristmas.com, its Owners, Administrators, Moderators or any other staff of any and all liability and waive all rights I may have under all laws and governing bodies. By posting in this thread you agree you are entering a binding contract between the Organizer (ukewarrior) and the Participant.

    Click below to read the rules:

    Group Buy Rules
    You MUST be a Supporting Member to participate in any Group Buy held on DIYC.



    You can become a Supporting member by clicking "Settings" in the upper right of the page, and then "Paid Subscriptions" in the "My Account" menu on the left.
    Participation in all Group Buys will require you to be a Supporting member.

    Supporting Member has it's perks





    This Group Buy is for one bare RENESP Board and full BOM



    BOM

    Description (quantity)

    3.3V Regulator (1)
    220uF capacitor (1)
    0.1uF capacitor (1)
    8 pin shrouded socket (1)
    8 pin connector (1)
    Preci-DIP socket (1)
    DIP Adapter (1)
    1K Ohm resistor (1)
    IDC ribbon cable (12")
    2.54 pin header (1)
    1N4148 diode (3)
    ESP8266 WiFi unit (1)



    This Group Buy will end on May 3, 2017 at 8pm Eastern US time or sooner if the maximum is reached.


    Please note: This Group Buy will be limited to 60 BOMs.


    Information Threads
    http://doityourselfchristmas.com/for...310#post398310
    This board was designed by madsci1016


    Pricing Info:
    The PCB with BOM are $10.83. This does not include shipping; but does include all other fees.

    This pricing assumes that at least 50 units are paid for. If less than 50 units are ordered, all money will be refunded and the group buy will be cancelled.

    Timing
    In order to keep prices down, some of the BOM is being ordered from China. Recent experience has shown that orders can take 30-40 days for delivery.
    Therefore, it may be 4-5 weeks from the end of the Group Buy before shipment occurs.

    Insurance - is optional, but no responsibility for loss in transit if insurance isn't purchased
    $0.01 to $50 - $1.85
    $50.01 to $100 - $2.90


    Shipping (US)
    Do to the vast quantity differences that may be ordered, its impossible to state shipping up front.
    Shipping will be done by USPS flat rate priority mail or first class mail if under 13 ounces. Flat rate prices range from $5.30 to $11.15. I will always try to save you money on shipping. If under 13 ounces, they will ship first class mail in a padded envelope to keep costs down. This is typically around $3.

    Canada and outside North America Additional shipping fees apply. Please note this in your post and I will get you actual shipping costs.
    [B]NOTE: I will be shipping to your paypal address. It is very important that you have a correct and compliant USPS address in your paypal profile or your order will be delayed.[\B]

    PayPal
    US: PayPal fees will be added to your shipping amount total: $0.30 + 3%
    Non-US: PayPal fees will be added: $0.30 + 4%

    Payment
    1. VERY Important: you MUST put your DIYC username in the comments field within Paypal. If you don't, your order will be rejected and your money immediately returned to you.
    2. Post your order in this thread.
    3. I will send you a PM with your final total and the PayPal address to send the funds to. Please send payment as a "Goods Payment" so I can ship easier. (see item #1 above!)
    4. DO NOT PM ME that you have paid. It is unnecessary and my inbox will fill up.
    5. Check post #2 of THIS THREAD for payment status.

    Please post the quantity desired, your country location, and if you want insurance.

  2. #2
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    3,670
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    This is a Status Page for Group Buy orders made and payments.

    This Group Buy is Closed.


    We have exceed the minimum threshold, this GB is a go!

    Updated: 5/8/2017 3:47pm EDT

    Name............# of Kits.......Insurance?.........Paid
    Kreeve..........2..................yes............ .....YES
    Mharnish.......4..................yes............. ....YES
    jeffu231........3..................yes............ .....YES
    csledge........ 5.................yes..................YES
    aurbo99........3.................yes, canada.......pending
    toy keeper.....4.................yes.................. YES
    ben&bobbi.....2..................yes.............. ...YES
    slug.............5...................yes.......... ......YES
    plittmann......3...................yes............ .....YES
    Hockeyhunter1956...3.........yes.................Y ES
    DaryanLenz...3..................yes............... ..YES
    Zaker..........2...................yes............ .....YES
    Jack Stevens..3................yes..................YES
    Skunberg......2.................no................ ....YES
    Mufassa.......4..................yes.............. ....YES
    chaversr......4..................yes.............. ....YES
    utimgr..........1.................no.............. .....YES


    Total: 53
    Last edited by ukewarrior; 05-08-2017 at 03:48 PM.

  3. Likes kreeve liked this post
  4. #3
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    3,670
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    We are at 31 and counting! We need to get to 50 for the parts (BOM) part of this whole thing to make sense as a group buy.
    So, if you are considering doing this, jump in and don't hold back!

  5. #4
    Join Date
    Jan 2016
    Posts
    108
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    2 with insurance, USA
    Last edited by kreeve; 04-19-2017 at 07:15 PM.

  6. #5
    Join Date
    Dec 2014
    Location
    Langhorne, PA
    Posts
    515
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    4 kits with insurance for me.

    Mark
    Langhorne, PA 19047
    USA

    Thanks for putting the group buy together!!
    2014 - pretty basic static display
    2015 - lots of Blinky Flashy
    5 x Renard SS24
    2 x Renard SS16 for singing trees
    2 x e682 for around 2000 pixels
    2016 - Up to around 12,000 pixels and still wanting more.

  7. #6
    Join Date
    Oct 2011
    Location
    Maryville, Illinois
    Posts
    1,025
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    3 kits with insurance. USA

  8. #7
    Join Date
    Nov 2011
    Location
    Dallas, TX
    Posts
    22
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    5 with insurance, USA

    Sent from my LG-D850 using Tapatalk

  9. #8
    Join Date
    Jun 2007
    Location
    Nova Scotia, Canada
    Posts
    2,000
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    3 with insurance, Canada
    Cheers!
    Steve

    Learn 1 new thing everyday.

    "AURBO" -- Aurora Borealis

    My weather today



    Chat link | Christmas Wiki link

  10. #9
    Join Date
    Jan 2009
    Location
    Palmdale, CA
    Posts
    61
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    I'd like 4 with insurance

  11. #10
    Join Date
    Jan 2010
    Location
    Mims, Fl
    Posts
    512
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM *Round 2*

    i would like 2 with insurance
    http://www.vixenlights.com/wp-content/uploads/2013/05/Vixen3-Logo-435x165White-300x107.png

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •