Results 1 to 10 of 18

Thread: Red pixels

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2013
    Post Thanks / Like

    Default Red pixels

    I'm testing pixels that have recently arrived in the mail. They are soldered to RAy Wu's 3 pin pig tails and plugged into a falcon F16v2. I'm using 12v power supplies and 12v pixels. When connected to the board and the controller plugged in, all pixels are a very dim red/pink. If I use the test mode on the controller, they seem to function as normal but once I stop they go back to the red. I have double checked the connections and power is to power ect. I double checked Ray's store as well. Any ideas?

    Edit: The picture below is connected with butt connectors because the first set wasn't working. I didn't want to solder those as I was looking for a quick connection. However, same results.

    Sent from my iPhone using Tapatalk
    Last edited by slim00209; 03-20-2017 at 01:21 AM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts