Page 1 of 31 12311 ... LastLast
Results 1 to 10 of 364

Thread: Soldering Irons

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2007
    Location
    Mooresville, NC
    Posts
    7,684
    Post Thanks / Like

    Default Soldering Irons

    Not all soldering irons are created equal. I went into this venture with an old Weller SP23 hobby iron. I thought I had a decent iron for this stuff. I struggled a bit with tips and heat, but wrote it off as inexperience. Then it was suggested to pick up a better iron. It was suggested that a CSI unit would be much better. I bought one, and after the first use, I wish I had bought it when I started. There are better ones than this one, but it is really hard to beat the price for what you get.
    When purchasing be sure to get extra tips, as it only comes with one.

    Either of these units are great...
    http://circuitspecialists.com/prod.itml/icOid/7307


    8)
    James Family Christmas - 1600 channels of SS Renard channels
    Facebook - James Family Christmas


  2. #2
    Join Date
    May 2007
    Location
    Long Island, NY
    Posts
    7,701
    Post Thanks / Like

    Default

    I use the CSI-Station2A listed above. I love it. Best iron I have ever used and a very affordable price, $49.95.
    Attached Images Attached Images
    Thanks,
    Brian, your friendly site Admin.

  3. #3
    Join Date
    Nov 2015
    Location
    Westminster, CA
    Posts
    98
    Post Thanks / Like

    Default Re: Soldering Irons

    http://www.ebay.com/itm/311432002194...%3AMEBIDX%3AIT


    Quote Originally Posted by Macrosill View Post
    I use the CSI-Station2A listed above. I love it. Best iron I have ever used and a very affordable price, $49.95.
    Try to put together PX1 board over the weekend using my cheap 27w, it was painful. Looing to by an economical soldering iron. What are your thought on these two?
    or any other recommendation.

    Thanks,
    Last edited by Augus; 01-25-2016 at 01:34 PM.

  4. #4
    Join Date
    Dec 2014
    Location
    Southern IL
    Posts
    944
    Post Thanks / Like

    Default Re: Soldering Irons

    Quote Originally Posted by Augus View Post
    http://www.ebay.com/itm/311432002194...%3AMEBIDX%3AIT




    Try to put together PX1 board over the weekend using my cheap 27w, it was painful. Looing to by an economical soldering iron. What are your thought on these two?
    or any other recommendation.

    Thanks,

    That specific csi model is discontinued. However I would recommend a csi unit, I have the premiere and love it.

  5. #5
    Join Date
    May 2007
    Location
    Sacramento, CA
    Posts
    353
    Post Thanks / Like

    Default

    I agree that a GOOD soldering iron is best tool you can have, if you plan to solder a lot! Saves time and saves your components from getting burned up!

    I can't remember how I came to this iron, but I like it and it heats up quickly. From turn on to soldering temp it takes 30 seconds. However it is more expense then the previously mentioned irons ($60). It comes with a 1/32" tip, 1/16" is an option also.


    http://www.jameco.com/webapp/wcs/sto...oductId=229673


    ms
    Matt Stemple

  6. #6
    Join Date
    May 2007
    Location
    Broken Arrow, Oklahoma
    Posts
    634
    Post Thanks / Like

    Default

    I have a CSI Station 1A and the price was right.
    [SIGPIC][/SIGPIC]

  7. #7
    Join Date
    May 2007
    Location
    Melbourne, Australia
    Posts
    1,079
    Post Thanks / Like

    Default

    best investment you can make is a good temp controlled Solder Iron.

    I has used professional Soldering Stations worth in excess of 1000$, and the humble 100$ unit is just as good for Mr Joe average.

    http://www.altronics.com.au/index.as...=item&id=T2442




    This is the one I use.

  8. #8
    Join Date
    Jun 2007
    Location
    Charleston, SC
    Posts
    292
    Post Thanks / Like

    Default

    I use these:



    For soldering and this for de-soldering:



    The soldering station is ESD certified, I'm anal about the whole static thing. I use all this on a ESD/Anti-static mat and of course have such map at my feel/wheels of chair. While wearing a wrist grounding strap. My wife still makes comments like, "See, you're connected to that thing more than you are me."

    With this co-op darn near out of the way... I suppose its time to ensure I'm 'connected' to her a little more often. Enough said.

  9. #9
    Join Date
    Jun 2007
    Location
    Deep South in Mississippi
    Posts
    122
    Post Thanks / Like

    Default

    Are any of the Weller irons any good?
    "Often Wrong", wife

  10. #10
    Join Date
    May 2012
    Location
    Chilliwack, BC Canada
    Posts
    134
    Post Thanks / Like

    Default Re: Soldering Irons

    Quote Originally Posted by JohnByrne View Post
    Are any of the Weller irons any good?
    I have an old one (25 years old) with the extra temperature controls, etc. and it's been excellent. Works great every time, unlike the crap we have at work whose tips carbon up and rust.
    diamondcrescent.com

Page 1 of 31 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •