Page 1 of 9 123 ... LastLast
Results 1 to 10 of 81

Thread: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

  1. #1
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    4,263
    Post Thanks / Like

    Default ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    Group Buy for the low cost ESP8266 based Adapter for GECE Light strings

    What does it do?

    The ESPixel GECE adapter will convert any GECE string from a device that requires a Pixel Controller to a device that can receive e1.31 sACN data over WiFi.

    Please understand the impact of this statement..... This means you can run GECE pixels without investing in a pixel controller !

    Yes, you read that correctly. You can run your sequences out of your show PC over WiFi directly to your GECE strings.

    One of the neat things about this device is that it is designed to fit inside the original GECE controller board enclosure and to use the original GECE power supply.



    Group Buy Rules: Read before posting in this thread!

    By participating in this Group Buy all participants agree to release www.doityourselfchristmas.com, its Owners, Administrators, Moderators or any other staff of any and all liability and waive all rights I may have under all laws and governing bodies. By posting in this thread you agree you are entering a binding contract between the Organizer (ukewarrior) and the Participant.

    Click below to read the rules:

    Group Buy Rules
    You MUST be a Supporting Member to participate in any Group Buy held on DIYC.



    You can become a Supporting member by clicking "Settings" in the upper right of the page, and then "Paid Subscriptions" in the "My Account" menu on the left.
    Participation in all Group Buys will require you to be a Supporting member.

    Supporting Member has it's perks





    This Group Buy is for one bare ESPixel GECE Board and full BOM


    DSC_0028small.jpg

    BOM

    Description (quantity)

    3.3V Regulator (1)
    10uF capacitor (1)
    0.1uF capacitor (1)
    Mosfet (1)
    Preci-DIP socket (1)
    330 Ohm resistor (2)
    2.54 pin header (1)
    1N4148 diode (1)
    Tactile button (1)
    ESP-01 WiFi unit (1)



    This Group Buy will end on Jan 17, 2016 at 8pm Eastern US time or sooner if the maximum is reached.


    Please note: This Group Buy will be limited to 100 participants or 400 BOMs.

    Development Thread Info:
    http://doityourselfchristmas.com/for...602#post398602


    Pricing Info:
    The PCB with BOM are $8.50. This does not include shipping; but does include all other fees.

    This pricing assumes that at least 100 units are paid for. If less than 100 units are ordered, all money will be refunded and the group buy will be cancelled.

    Timing
    In order to keep prices down, some of the BOM is being ordered from China. Recent experience has shown that orders can take 30-40 days for delivery.
    Therefore, it may be 4-5 weeks from the end of the Group Buy before shipment occurs.

    Insurance - is optional, but no responsibility for loss in transit if insurance isn't purchased
    $0.01 to $50 - $1.85
    $50.01 to $100 - $2.90


    Shipping (US)
    Do to the vast quantity differences that may be ordered, its impossible to state shipping up front.
    Shipping will be done by USPS flat rate priority mail or first class mail if under 13 ounces. Flat rate prices range from $5.30 to $11.15. I will always try to save you money on shipping. If under 13 ounces, they will ship first class mail in a padded envelope to keep costs down.

    Canada and outside North America Additional shipping fees apply. Please note this in your post and I will get you actual shipping costs.
    [B]NOTE: I will be shipping to your paypal address. It is very important that you have a correct and compliant USPS address in your paypal profile or your order will be delayed.[\B]

    PayPal
    US: PayPal fees will be added to your shipping total: $0.30 + 3%
    Non-US: PayPal fees will be added: $0.30 + 4%

    Payment
    1. VERY Important: you MUST put your DIYC username in the comments field within Paypal. If you don't, your order will be rejected and your money immediately returned to you.
    2. Post your order in this thread.
    3. I will send you a PM with your final total and the PayPal address to send the funds to. Please send payment as a "Goods Payment" so I can ship easier. (see item #1 above!)
    4. DO NOT PM ME that you have paid. It is unnecessary and my inbox will fill up.
    5. Check post #2 for payment status.

    Please post the quantity desired, your country location, and if you want insurance. If you are from Canada or outside the US, please post that in your PM to me so I calculate postage correctly.

  2. Thanks neonexpresso thanked for this post
  3. #2
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    4,263
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    Group Buy Status Page

    I have sent a payment PM to everyone on the group buy as of 1/17/2016 8:53pm EST.
    Be sure to check your DIYC messages for information.


    There is an error in the BOM listed in post #1. By Group Buy Rules, I'm not allowed to change the first post once listed.
    A preci-DIP socket is listed.
    This is a typo carryover from the RENESP group buy and shouldn't be there.
    If you want to see Bill Porters BOM, you need to follow the links in his blog to his github page for all the board, code, bom file information for this board and the RENESP board.
    They use the same code base and have somewhat similar BOMs.
    www.billporter.info
    Github:
    https://github.com/madsci1016/ESPixel


    DIYC UserID.............................QTY


    imbluenote................................4 PAID
    cekowalski.................................12, with ins.PAID
    critic2.........................................25PAID
    byaky.........................................6, with ins., CanadaPAID
    mlevings....................................4PAID
    Skunberg...................................10, with ins.PAID
    wdmountaindad.........................20 PAID
    Crucial........................................10
    Deacon.......................................2PAID
    PCPackrat...................................5PAID
    EricJilot.......................................10 , with ins.PAID
    dkauthen....................................10 PAID
    lawn_racer69.............................3 PAID
    AuburnLights..............................5, with ins.PAID
    duramadmax..............................5PAID
    atxc5..........................................15 PAID
    jonchilds....................................5PAID
    Zeph..........................................3PAID
    chaversr.....................................8 PAID
    danozfw.....................................4PAID
    kmaximus..................................16PAID
    leeweber85...............................12, with ins.PAID
    jklingert.....................................12, with ins.PAID
    ebrady.......................................15, local pickupPAID
    iflights........................................10 , with ins.PAID
    CJHacker.....................................4PAID
    randyn........................................3, with ins, CanadaPAID
    bgwhtahoe.................................1PAID
    shanicus.....................................4, with ins, CanadaPAID
    gunther......................................4PAID
    rtyfz450s....................................10, with ins.PAID
    Creativedesign...........................4, with ins.PAID
    sim1011......................................4, with ins.PAID
    Festus........................................10 PAID


    Total:.........................................271
    Last edited by ukewarrior; 01-29-2016 at 10:32 AM.

  4. #3
    Join Date
    Nov 2011
    Location
    St.Louis mo
    Posts
    1,608
    Post Thanks / Like

    Default ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    4 please,us,no insurance
    Last edited by imbluenote; 01-03-2016 at 03:08 PM.

  5. #4
    Join Date
    Dec 2011
    Posts
    13
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    12 for me, thanks! US, and insurance.

    Sent from my HTC One_M8 using Tapatalk

  6. #5
    Join Date
    Mar 2010
    Location
    Mentor, OH
    Posts
    1,142
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    20 units.
    Chuck P
    nothing to show

  7. #6
    Join Date
    Nov 2015
    Location
    Toronto, Canada
    Posts
    16
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    6 please - Toronto, On, Canada - Insurance

  8. #7
    Join Date
    Dec 2012
    Location
    Claremore, OK
    Posts
    184
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I'll take 4 without insurance.

  9. #8
    Join Date
    Jan 2009
    Location
    Eagan, Mn.
    Posts
    4,073
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    10 each with insurance USA. Thank you.
    2009 - 48 channel MegaTree 4800 lights
    plus 3200 lights static display.
    2010 - 6 Snowflakes on heavy equipment stored in front yard :-(
    2011 - 72 channel Megatree 7520 lights,
    120 channel total about 10k lights total

  10. #9
    Join Date
    Nov 2013
    Location
    Fairview, West Virginia
    Posts
    94
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I'll take 20, no insurance needed and thank-you

  11. #10
    Join Date
    Sep 2007
    Location
    Richmond, VA
    Posts
    19
    Post Thanks / Like

    Default Re: ESPixelGECE GECE ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I would like to order 10, no insurance. Thank you.

Page 1 of 9 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •