Results 1 to 4 of 4

Thread: LED installation direction

  1. #1
    Join Date
    May 2007
    Location
    Tulsa, Ok
    Posts
    428
    Post Thanks / Like

    Default LED installation direction

    Bassboy had a problem with his FGDimmer system. We worked on it and we discovered that the SSR he was using needed the controller to sink the voltage to turn on the SSR. My personal SSRs need the controller to source the voltage to turn on the SSRs. He got his SSRs from a coop buy and they need the controller to sink the voltage.

    I can/will make a program to sink the voltage from the SSR but the module selection may need to be programmed into each 18F4525 I/C.

    Here is the importaint part: if you are installing the optional LED's, make sure you install them in the correct direction for your SSR's.

  2. #2
    spike Guest

    Default

    It is Sean's SSR's that will require the new program. Or any other 5v common instead of common ground system.

  3. #3
    Join Date
    Mar 2017
    Posts
    3
    Post Thanks / Like

    Default Re: LED installation direction

    Yup use 5v Power Supply

  4. #4
    Join Date
    Dec 2007
    Location
    Treasure Valley, Idaho
    Posts
    3,356
    Post Thanks / Like

    Default Re: LED installation direction

    You do realize that you posted to a 10 year old thread...........

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •