Page 1 of 12 12311 ... LastLast
Results 1 to 10 of 119

Thread: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

  1. #1
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    4,267
    Post Thanks / Like

    Default RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    Group Buy for the low cost ESP8266 based Adapter for Renard Controllers

    What does it do?

    The RenardESP adapter will convert any Renard that uses the SS BOM (and most of the non - SS models) from a device controlled by RS-485 Serial to a device controlled by e1.31 or sACN over WiFi. It does this by replacing the RS-485 receiver chip on the Renard board.

    So instead of running CAT 5 through your yard and connecting your Renards to a RS-485 USB adapter or an e1.31 bridge, you can cut the cords and stream all your control data over wifi.


    Group Buy Rules: Read before posting in this thread!

    By participating in this Group Buy all participants agree to release www.doityourselfchristmas.com, its Owners, Administrators, Moderators or any other staff of any and all liability and waive all rights I may have under all laws and governing bodies. By posting in this thread you agree you are entering a binding contract between the Organizer (ukewarrior) and the Participant.

    Click below to read the rules:

    Group Buy Rules
    You MUST be a Supporting Member to participate in any Group Buy held on DIYC.



    You can become a Supporting member by clicking "Settings" in the upper right of the page, and then "Paid Subscriptions" in the "My Account" menu on the left.
    Participation in all Group Buys will require you to be a Supporting member.

    Supporting Member has it's perks





    This Group Buy is for one bare RENESP Board and full BOM



    BOM

    Description (quantity)

    3.3V Regulator (1)
    200uF capacitor (1)
    0.1uF capacitor (1)
    8 pin shrouded socket (1)
    8 pin connector (1)
    Preci-DIP socket (1)
    DIP Adapter (1)
    1K Ohm resistor (1)
    IDC ribbon cable (12")
    2.54 pin header (1)
    1N4148 diode (3)
    ESP8266 WiFi unit (1)



    This Group Buy will end on Nov 15, 2015 at 8pm Eastern US time or sooner if the maximum is reached.


    Please note: This Group Buy will be limited to 100 participants or 400 BOMs.


    Information Threads
    http://doityourselfchristmas.com/for...310#post398310
    This board was designed by madsci1016


    Pricing Info:
    The PCB with BOM are $10.65. This does not include shipping; but does include all other fees.

    This pricing assumes that at least 100 units are paid for. If less than 100 units are ordered, all money will be refunded and the group buy will be cancelled.

    Timing
    In order to keep prices down, some of the BOM is being ordered from China. Recent experience has shown that orders can take 30-40 days for delivery.
    Therefore, it may be 4-5 weeks from the end of the Group Buy before shipment occurs.

    Insurance - is optional, but no responsibility for loss in transit if insurance isn't purchased
    $0.01 to $50 - $1.85
    $50.01 to $100 - $2.90


    Shipping (US)
    Do to the vast quantity differences that may be ordered, its impossible to state shipping up front.
    Shipping will be done by USPS flat rate priority mail or first class mail if under 13 ounces. Flat rate prices range from $5.30 to $11.15. I will always try to save you money on shipping. If under 13 ounces, they will ship first class mail in a padded envelope to keep costs down.

    Canada and outside North America Additional shipping fees apply. Please note this in your post and I will get you actual shipping costs.
    [B]NOTE: I will be shipping to your paypal address. It is very important that you have a correct and compliant USPS address in your paypal profile or your order will be delayed.[\B]

    PayPal
    US: PayPal fees will be added to your shipping total: $0.30 + 3%
    Non-US: PayPal fees will be added: $0.30 + 4%

    Payment
    1. VERY Important: you MUST put your DIYC username in the comments field within Paypal. If you don't, your order will be rejected and your money immediately returned to you.
    2. Post your order in this thread.
    3. I will send you a PM with your final total and the PayPal address to send the funds to. Please send payment as a "Goods Payment" so I can ship easier. (see item #1 above!)
    4. DO NOT PM ME that you have paid. It is unnecessary and my inbox will fill up.
    5. Check post #2 for payment status.

    Please post the quantity desired, your country location, and if you want insurance.

  2. #2
    Join Date
    Aug 2008
    Location
    Columbus, OH
    Posts
    4,267
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    Group Buy Status Thread:

    Status as of 11/20/2015:

    I have all payments except for two. You know who you are

    I have most parts on order and will finish ordering this weekend (assuming all payments are made)


    We are at the 100 qty threshold, so everyone can count on this Group Buy Moving Forward !


    DIYC name.......Qty.........Payment Status

    stenersonj.............4
    MindTrik.................2
    smohler.................5
    Arbo99..................2
    JasonPortwood.....3
    imbluenote............3
    jklingert................8
    Xenia....................2
    sonic777...............5
    Keith R.................2
    sparky588...........3
    holtm...................2
    AuburnLights.......4
    nuelemma............2
    tkrein...................2
    michaelc...............4
    mwestling............5
    Kev7274..............2
    ebrady.................8
    algerdes.............10
    Bakesbrownies....1
    kenoman742.......8
    barryiseeu...........4
    EMKLLK...............4
    MartinMueller2003...3
    Hockeyhunter1956...2
    cpcoaster.................3
    blantrip....................2
    gunther...................3
    Heldwhat Christmas.....3
    bud29.....................6
    Rob2791.................4
    Don6699................4
    slovanredneck........2






    total............127
    Last edited by ukewarrior; 11-20-2015 at 03:43 PM.

  3. #3
    Join Date
    Jan 2010
    Location
    Oshkosh Wi
    Posts
    201
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I would like 4 of these. Sincere thanks for your efforts.

    United States

    no insurance
    Last edited by stenersonj; 11-08-2015 at 07:08 PM.

  4. #4
    Join Date
    Aug 2010
    Location
    Wilmington, NC
    Posts
    1,534
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I'm in for 2

    Sent from my LG-H811 using Tapatalk

  5. #5
    Join Date
    Sep 2014
    Location
    Coarsegold, California
    Posts
    45
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    Put me down for 5 of them.

  6. #6
    Join Date
    Jun 2007
    Location
    Ontario, Canada
    Posts
    2,115
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I'm in for 2
    Cheers!
    Steve

    Learn 1 new thing everyday.

    "AURBO" -- Aurora Borealis

    My weather today



    Chat link | Christmas Wiki link

  7. #7
    Join Date
    Nov 2009
    Location
    Edgewood, KY (Cincinnati Area)
    Posts
    745
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I am in for 3.

    United States
    No insurance

  8. #8
    Join Date
    Nov 2011
    Location
    St.Louis mo
    Posts
    1,609
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    i'll try it out, 2016 may be the wireless year. Do you think there may be another buy next year as this is just to try it out, i would need more to go fully wireless next year.

    Qty 3.
    United States
    No insurance

  9. #9
    Join Date
    Jan 2009
    Location
    Eagan, Mn.
    Posts
    4,073
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    2ea please
    USA
    No insurance.
    2009 - 48 channel MegaTree 4800 lights
    plus 3200 lights static display.
    2010 - 6 Snowflakes on heavy equipment stored in front yard :-(
    2011 - 72 channel Megatree 7520 lights,
    120 channel total about 10k lights total

  10. #10
    Join Date
    Jan 2011
    Location
    Warren, NJ
    Posts
    1,731
    Post Thanks / Like

    Default Re: RENESP Renard ESP8266 WiFi Adapter Group Buy for PCB and BOM

    I'm in for 8 units, US shipping, add insurance. More wireless fun for next year!
    2012 Second Animated Christmas

    http://www.christmasinwarren.com

    Become a Supporting Member of DIYC! Click Here
    Tip: Backup your sequences on a free cloud storage site like Dropbox. Click Here for free 2Gb storage.

    Click here to show/hide my display details ...



Page 1 of 12 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •